Table of Contents
Advertisement
Make sure you install option cards that meet the system's
power requirements. See Appendix A.
Make sure the option card is not touching any other card. Also
make sure the card isn't touching the processor or heat sink
you have attached to the processor.
An external device connected to the option card is not
working correctly.
Make sure you are using the proper cable to securely connect
the device to the card.
Memory Module Problems
The memory count displayed by the power- on diagnostics
program is incorrect.
You may have installed the SIMMs incorrectly. They may be
the wrong type or speed, or they may not be inserted all the
way. See Chapter 4 for information on installing SIMMs.
Be sure you run SETUP after you install or remove memory
modules to automatically update your memory configuration.
(See Chapter 2.)
6 - 1 2
Troubleshooting
Advertisement
Table of Contents
