Removing The Processor Heat-Sink Fan; Replacing The Processor Heat-Sink Fan - Dell XPS L701X Service Manual
Hide thumbs
Also See for XPS L701X:
- Service manual (134 pages) ,
- Setup manual (106 pages) ,
- Setting up and using (32 pages)
Table of Contents
Advertisement
Back to Contents Page
Processor Heat-Sink Fan
Dell™ Inspiron™ One 2305/2310 Service Manual
Removing the Processor Heat-Sink Fan
Replacing the Processor Heat-Sink Fan
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
Removing the Processor Heat-Sink Fan
1. Follow the instructions in
2. Remove the back cover (see
3. Follow the instructions from
4. Remove the system-board shield (see
5. Disconnect the processor heat-sink fan cable from the connector (CPU FAN) on the system board.
6. Remove the two screws that secure the processor heat-sink fan to the chassis.
7. Carefully peel the silver foil from the processor heat sink.
8. Lift the processor heat-sink fan along with its cable away from the chassis.
NOTE:
The appearance of the system board may vary based on your computer model.
1
processor heat-sink fan cable
3
screws (2)
Replacing the Processor Heat-Sink Fan
1. Follow the instructions in
2. Align the screw holes on the processor heat-sink fan with the screw holes on the hex nut screws.
3. Replace the two screws that secure the processor heat-sink fan to the chassis.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
The heat sink may be very hot during normal operation. Ensure that it has had sufficient time to cool before you touch it.
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Before You
Begin.
Removing the Back
Cover).
step 2
to
step 5
in
Removing the Front
Removing the System-Board
2
processor heat-sink fan
Before You
Begin.
UserManuals.info
Stand.
Shield).
Advertisement
Table of Contents
