hit counter script
Cisco ASR 9000 Series Quick Reference Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. ASR 9000 Series
  6. Quick reference manual

Cisco ASR 9000 Series Quick Reference Manual

Line card
Hide thumbs Also See for ASR 9000 Series:
1
2
3
4
5
6
7

Advertisement

Table of Contents

The Cisco ASR 9000 Series Routers
meet the regulatory compliance
and safety approval requirements.
Note: Unless specified otherwise, the
images are for only representational
purposes.
For detailed safety information, see:
Regulatory Compliance and Safety
Information for the Cisco ASR 9000
Series Routers.
Safety Warnings
Failure to observe the safety
warnings may result in serious injury
to personnel or damage to the
hardware.
For hardware installation
documentation, see
Cisco ASR 9000 Series Aggregation
Services Router Hardware
Installation Guide
Cisco ASR 9000 Series Aggregation
Services Router Ethernet Line Card
Installation Guide
Cisco ASR 9000 Series Aggregation
Services Router Overview and
Reference Guide
© 2020 Cisco Systems, Inc. All rights reserved.
Cisco ASR 9000 Series Line Card Quick Reference Guide
Topics
1.
Unpacking the Line Card
2.
Installing the Line Card
3.
Cable Management
4.
Maintenance Best Practices
1

Advertisement

Table of Contents
loading

Related Manuals for Cisco ASR 9000 Series

Summary of Contents for Cisco ASR 9000 Series

  • Page 1 Cisco ASR 9000 Series Line Card Quick Reference Guide The Cisco ASR 9000 Series Routers meet the regulatory compliance Topics and safety approval requirements. Note: Unless specified otherwise, the images are for only representational Unpacking the Line Card purposes. Installing the Line Card...
  • Page 2 Wear ESD gloves to unwrap the ESD board. bag, and remove the line card. © 2020 Cisco Systems, Inc. All rights reserved.

  • Page 3: Installing The Line Card

    For manual OIR (online insertion and removal) of cards, disengage the line card from the backplane connector, and partially pull out the line card. Reseat the card to establish the connection again. Ejector lever (closed) © 2020 Cisco Systems, Inc. All rights reserved.

  • Page 4: Cable Management Tray

    Each line card has its own cable routing divider in the not in use. cable management tray. Route the cable or cable bundle (Cisco ASR 9010 Router) Raise the hinged cover to from the line card through the dividers of the cable increase access to the dividers.

  • Page 5: Chassis Airflow

    Inspect air filters once every 3 months. If there is an increase in temperature, please check the air filters and fans for any malfunctioning. For troubleshooting, reach out to Cisco TAC and isolate any possible hardware failure. Replace air filters that are clogged or damaged. Cleaning the air filters is not recommended.

  • Page 6: Operating Temperature

    Packaging Line Card While packing and transporting line cards or other modules, use only Cisco provided packaging. Any other improper packaging for moving equipment may severely damage the product. Repackage the components the same way as it was packaged at the time of product delivery by including all packaging materials.
  • Page 7 Install real-time corrosion measurement systems. Corrosion monitors enable you to take preventive action before serious damage occurs. The use of HEPA filters is advised to maintain clean air circulation systems. Avoid using direct air cooling on the product (network equipment). © 2020 Cisco Systems, Inc. All rights reserved.

Table of Contents