Table of Contents
Advertisement
7.4
Paper Feeding Roller (LFU) / Separator Pad
Necessary Tool
1 . Phillips Screwdriver #1 and #2.
Disassembly Procedures
1 . Remove a side cover (R).
2 . Remove a back cover (LFU).
3 . Remove a paper guide (L).
4 . Remove a paper guide (UL).
5 . Remove a harness (OHP sensor, paper sensor) connected to a paper
guide (UL).
6 . Sliding a paper feeding roller to the right side, remove it from a shaft.
7 . Pull up a separator pad, and tale it out.
Assembly Procedures
1 . Assemble a new separator pad.
2 . Assemble a new paper feeding roller.
3 . Assemble other pieces according to the reverse sequence of
disassembling.
Caution
Do not touch surface of paper feeding roller and separator pad.
[No tool is necessary]
[Remove screw BT4 8 (1 pc.)]
[Remove screws ST3 6 (2 pcs.)]
[Remove screws ST3 6 (2 pcs.)]
26
Advertisement
Chapters
Table of Contents
