Table of Contents
Advertisement
"Remove the Solid State Drive (SSD)" on page 34
"Remove the memory modules" on page 38
"Remove the Wi-Fi card" on page 39
"Remove the fans" on page 41
"Remove the heat sink" on page 43
"Remove the thermal cover" on page 44
"Remove the system board" on page 47
Step 1.
Peel off the black upper mylar.
Figure 42. Peel off the upper mylar
Step 2.
Remove the 6 screws.
Figure 43. Remove the 6 screws
Screw specifications
3
M2.0 x 2.5
2
M2.5 x 5
Step 3.
Remove the strip cover.
50
Hardware Maintenance Manual
Number of screws
4
2
Hide quick links:
Advertisement
Table of Contents
