hit counter script
Fujitsu LIFEBOOK S936 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. LIFEBOOK S936
  6. Operating manual

Fujitsu LIFEBOOK S936 Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

System
Operating Manual
FUJITSU LIFEBOOK S936

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu LIFEBOOK S936

Summary of Contents for Fujitsu LIFEBOOK S936

  • Page 1 System Operating Manual FUJITSU LIFEBOOK S936...
  • Page 2 You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2016. All rights reserved. Publication Date 02/2016 Order No.: A26391-K440-Z320-1-7619, edition 1...
  • Page 5 FUJITSU LIFEBOOK S936 Operating Manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes...
  • Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.

  • Page 7: Table Of Contents

    Using the power-management features ........... 42 Fujitsu...
  • Page 8 Preparing to remove components ............68 Fujitsu...
  • Page 9 DOC (Industry CANADA) notices ........... . . 86 FCC regulatory information for notebooks with radio device ......88 Fujitsu...
  • Page 10 Index ................. . 90 Fujitsu...

  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.

  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...

  • Page 13: Ports And Controls

    11 = NFC (Near Field Communication, optional) 4 = Microphone 12 = Touchpad buttons 5 = Status indicators 13 = SmartCard slot 6 = Eco button 14 = Touchpad (NFC optional) 7 = ON/OFF button 8 = Fingerprint sensor or palm vein sensor (optional) Fujitsu...
  • Page 14 6 = Combined headphone/microphone port 3 = VGA monitor port 4 = HDMI port Right side 1 = USB port 3.0 3 = USB port 3.0 2 = Module bay with optional optical drive 4 = Security lock device Fujitsu...
  • Page 15 Ports and controls Bottom 1 = Memory service compartment 4 = Battery cover (SIM card under the battery) 2 = Module bay release button 5 = Port Replicator port 3 = Battery release slider Fujitsu...

  • Page 16: Important Notes

    (e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu...

  • Page 17: Energy Saving

    You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment. Energy saving under Windows ► Make use of the power management features (see ""Using the power-management features", Page 42"). Fujitsu...

  • Page 18: Travelling With Your Notebook

    ► Unplug the mains adapter and all external devices from the power socket. ► Disconnect the mains adapter cable and the data cables for all external devices. ► Close the LCD screen. ► To protect against damaging jolts and bumps, use a notebook carrying case to transport your notebook. Fujitsu...

  • Page 19: Cleaning The Notebook

    The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. To clean the keyboard and the touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu...

  • Page 20: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...

  • Page 21: Selecting A Location

    ► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 22: Switching On The Device For The First Time

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".

  • Page 23: Working With The Notebook

    Please refer to the notes in "Important notes", Page Status indicators and battery button Statusindicator panel The LEDs of the status indicators provide information about the status of the power supply, the drives and the keyboard functions. Fujitsu...
  • Page 24 In sleep mode (S4) and when switched off (S5), the battery button provides information on the state of charge of the two batteries. Press the button and the battery indicator lights up. The meaning of the colours corresponds to the following table with statuses S2 to S3: Fujitsu...
  • Page 25 50% of maximum capacity. Red: The notebook is in suspend mode and power is being supplied by the first battery. The first battery is charged to between 0% and 12% of maximum capacity. Indicator is not The first battery is not installed. Fujitsu...
  • Page 26 Indicator is lit key has been pressed. The virtual numerical keypad is activated. You can output the characters indicated on the upper right of the keys. Indicator is not key has not been pressed. The virtual numerical keypad is not active. Fujitsu...

  • Page 27: Switching On The Notebook

    Indicator is not The energy saving functions are deactivated. Switching on the notebook ► Open the LCD screen. Switching on ► Press the ON/OFF button for about one second to switch the notebook on. The power-on indicator is lit. Fujitsu...

  • Page 28: Notebook: Switching Off

    Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook is not switched off automatically, press the ON/OFF button for approx. five seconds. ► Close the LCD screen. Fujitsu...

  • Page 29: Keyboard

    The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu...
  • Page 30 The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...

  • Page 31: Virtual Numeric Keypad

    The keyboard layout shown below may differ from your actual device. 1 = Valid characters when the 2 = Valid characters when the key is not activated key is activated Further information about the status indicators can be found in chapter "Status indicators and battery button", Page Fujitsu...

  • Page 32: Key Combinations

    Fn+F6 Screenbrightness This key combination decreases the brightness of the screen. Increase screen brightness Fn+F7 Screenbrightness This key combination increases the brightness of the screen. Decrease volume Fn+F8 Volume This key combination reduces the volume of the integrated loudspeakers. Fujitsu...

  • Page 33: Country And Keyboard Settings

    This key combination moves the cursor back to the previous tabular stop. Shift+Tab Backtab Key combinations using the Windows keys are detailed in the manual for your operating system. Country and keyboard settings ► Change the country and keyboard settings as described in the documentation for your operating system. Fujitsu...

  • Page 34: Eco Button

    If the device is switched off, you can check the battery status with this key. After pressing the key, the battery indicator lights up briefly. The colour of the indicator depends on the still available battery charge. For a description of the indicator colours, see "Status indicators and battery button", Page Fujitsu...

  • Page 35: Touchpad And Touchpad Buttons

    ► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu...

  • Page 36: Dragging Items

    LCDscreen Notes High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a certain resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear picture.

  • Page 37: Using Fingers

    LCD screen may flicker while the light level is adjusted. Further information on using the camera and on the additional settings which are possible for your camera can be found in the help function of the program which uses the camera. Fujitsu...

  • Page 38: Rechargeable Battery

    Never store the batteries in the device. Removing and installing the battery Only use batteries approved by Fujitsu for your notebook. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections.
  • Page 39 "Preparing to remove components", Page ► Slide the release button in the direction of the arrow (1). ► Slide the release button in the direction of the arrow (2) and hold it in place. ► Lift off the battery cover (3). Fujitsu...
  • Page 40 ► Slide the release button in the direction of the arrow (1) and hold it in place. ► Insert the battery into the battery compartment until it engages positively (2). The battery cover can only be closed if the battery is locked. Fujitsu...
  • Page 41 ► Slide the release button in the direction of the arrow (3) and hold it in place. ► Place the battery cover on the device (4). ► Slide the release button in the direction of the arrow (5). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...

  • Page 42: Module

    Removing a module Module Drive WeightSaver ► Slide the release mechanism (1) in the direction of the arrow and hold. ► Pull the module (2) out of the module bay. Fujitsu...

  • Page 43: Installing A Module

    Avoid storing a data carrier in areas subject to high temperatures or humidity. You can use data carriers with a diameter of 8 cm / 3.15" or 12 cm / 4.7" in the drive. When using a data carrier of lesser quality, vibrations and reading errors may occur. Fujitsu...

  • Page 44: Cd/Dvd Indicator

    ► Gently pull the drive tray (2) completely out. ► Place the data carrier in the drive tray with the printed side facing upwards. ► Remove a data carrier that has been inserted. ► Push in the drive tray until you feel it lock into place. Fujitsu...

  • Page 45: Manual Removal (Emergency Removal)

    ► Switch your notebook off. ► Push a pen or a piece of wire (such as a paperclip) firmly into the opening (1). The drive tray is ejected. You can now pull the drive tray (2) out of the drive. Fujitsu...

  • Page 46: Using The Power-Management Features

    When you close the LCD screen, depending on the setting in Windows, the notebook automatically enters a power saving mode. The recommended settings for the Windows energy saving functions are predefined as "Fujitsu Computer EcoSettings" in the Power Options of the Control Panel and can be displayed there.

  • Page 47: Supported Formats

    (see the documentation for your operating system). ► On devices with card locking: Press on the memory card (1). Memory card The memory card is released and can now be removed. ► Pull the memory card out of the slot (2). Fujitsu...

  • Page 48: Loudspeakers And Microphones

    ► Insert the SIM card (a) into the SIM card holder as the diagram on the SIM card holder shows. ► Push the SIM card holder back into the bay (2). ► Complete the installation, see chapter "Finishing component removal", Page Fujitsu...

  • Page 49: Removing The Sim Card

    "Finishing component removal", Page Wireless LAN / Bluetooth / UMTS / LTE / NFC radio components The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off ►...

  • Page 50: Setting Up Wlan Access

    NFC (Near Field Communication, optional) Your notebook is optionally equipped with an integrated NFC chip. Near Field Communication is used for contact-free data exchange by radio over short distances (a few centimetres). 1 = Position NFC Fujitsu...

  • Page 51: Access Via Umts / Lte

    If you did not order a UMTS / LTE module, you can purchase the accessories for UMTS / LTE reception from your retailer or your Fujitsu Technology Solutions dealer. You will find information on establishing the connection with the UMTS / LTE network in the documentation for the hardware used.

  • Page 52: Your Port Replicator (Optional)

    7 = DVI-D port 2 = ON/OFF button 8 = DisplayPort 3 = Security Lock device 9 = LAN port 4 = Unlocking lever 10 = USB ports 5 = DC input connector (DC IN) Fujitsu...

  • Page 53: Connecting The Notebook To The Port Replicator

    PortReplicator ► Switch the notebook off. ► Remove the mains plug for the mains adapter from the mains socket. ► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook. Fujitsu...
  • Page 54 ► Lay it on the Port Replicator (1). Position the notebook so that it is in line with the back edge of the Port Replicator. ► Press on the notebook at the position denoted (2) to make sure that it engages into the Port Replicator. Fujitsu...

  • Page 55: Connecting The Mains Adapter To The Port Replicator

    If the notebook cannot be shut down properly, press the ON/OFF button on the Port Replicator for approx. four seconds. The notebook will switch off. Any unsaved data may however be lost. Fujitsu...

  • Page 56: Disconnecting The Notebook From The Port Replicator

    We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu...

  • Page 57: Security Functions

    ► To be able to use the palm vein sensor (1), you must install the software. The current Workplace Protect software for palm and fingerprint sensors can be found on the Internet at "http://www.fujitsu.com/fts/solutions/business-technology/security/secure/index.html". Fujitsu...

  • Page 58: Configuring The Fingerprint Sensor

    ► You must install the fingerprint software in order to be able to use the fingerprint sensor (1). The current Workplace Protect software for palm vein and fingerprint sensors can be found on the Internet at "http://www.fujitsu.com/fts/solutions/business-technology/security/secure/index.html". Fujitsu...

  • Page 59: Using The Security Lock

    Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.

  • Page 60: Protecting Bios Setup Utility (Supervisor And User Password)

    You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. Password Supervisorpassword User password ► Call the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as for password assignment. Fujitsu...

  • Page 61: Password Protection For Booting Of The Operating System

    Password protection for the hard disk Passwordprotection: The hard disk password prevents unauthorised access to the hard disk drives and is checked internally each time the system is booted. The prerequisite for this is that you have assigned at least the supervisor password. Fujitsu...

  • Page 62: Activating Hard Disk Protection

    ► To cancel the password for the second hard disk (Drive1), go to the Drive1 area and select the field Set Master Password, then proceed in exactly the same way as for cancelling the password for the first hard disk (Drive0). Fujitsu...

  • Page 63: Boot From Removable Media

    Setup Notice: Changes have been saved is displayed to confirm that the text has been saved. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The notebook will restart and the Owner Information will be adopted. Fujitsu...

  • Page 64: Trusted Platform Module (Tpm) (Device-Dependent)

    ► Mark the TPM Security Chip Setting field and press the Enter key. ► Select Disabled to deactivate the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu...

  • Page 65: Smartcard Reader

    SmartCard with you. In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.

  • Page 66: Connecting External Devices

    You can also use a key combination to switch back and forth between the external monitor and the notebook’s LCD screen, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD screen simultaneously. Fujitsu...

  • Page 67: Connecting An External Monitor To The Port Replicator

    ► First switch on the external monitor and then the notebook. You can also switch between the external monitor and the LCD monitor of the notebook, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. Fujitsu...

  • Page 68: Hdmi Port

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...

  • Page 69: Usb Port With Charging Function (Anytime Usb Charge)

    ► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 70: Connecting External Audio Devices

    If you purchase a cable from a retailer, please note the following information: The headphones/microphone/Line-In/Line-Out/headset-combi port on your notebook is a "3.5 mm jack". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu...

  • Page 71: Removing And Installing Components During Servicing

    The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu...

  • Page 72: Preparing To Remove Components

    Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu...

  • Page 73: Removing The Cover

    ► Lift the cover off the notebook (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu...

  • Page 74: Installing A Memory Module

    ► Install the battery again (see "Installing a battery", Page 36). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu...

  • Page 75: Settings In Bios Setup Utility

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...

  • Page 76: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 77: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...

  • Page 78: Restoring The Hard Disk Contents Under Windows

    When certain characters are entered on the keyboard, only numerals are written Abeepsounds everysecond Cause Troubleshooting The virtual numeric keypad of your device is ► Press the key. activated, see "Virtual numeric keypad", Page 27 Fujitsu...

  • Page 79: The Notebook's Lcd Screen Remains Blank

    ► Check whether the data cable is properly connected to the notebook and the external monitor (if it is plugged in with a connector). ► Switch on the external monitor and the notebook. Fujitsu...

  • Page 80: The External Monitor Is Blank Or The Image Is Unstable

    ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. The power adapter is not connected correctly. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on. Fujitsu...

  • Page 81: The Notebook Stops Working

    The wireless component is enabled. Despite ► Check whether the radio connection is this, the wireless connection to a network does switched on via the software. not work. ► Further information on using the radio component can be found in the help files. Fujitsu...

  • Page 82: Smartcard Reader Is Not Recognised

    ► If you are working in a network, contact your system administrator, who can boot up your notebook with a Supervisor SmartCard. Acoustic warnings Acoustic error messages Errors Cause Troubleshooting A beep sounds every few seconds. ► Charge the battery. The battery is almost flat. Fujitsu...

  • Page 83: Error Messages On The Screen

    Press <F1> to resume, <F2> to SETUP operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating system. BIOS Setup. Fujitsu...
  • Page 84 System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...

  • Page 85: Technical Data

    8-GByte or 16-GByte module The data sheet for the device provides further technical data. You can find the data sheet on your device or you can download it from the Internet at "http://www.fujitsu.com/fts/support/". Port replicator (optional) Electrical data Safety regulations complied with...

  • Page 86: Rechargeable Battery

    Technical data Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/". Rated voltage 10.8 V / 14.4 V Rated capacity 77 Wh or 51 Wh (depending on the battery type) Mains adapter Technicalspecifications...

  • Page 87: Manufacturer's Notes

    Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. CE marking...

  • Page 88: Radio Frequencies Used

    Federal Communications Commission (FCC) of the USA. Although it is not explicitly forbidden to travel in the US trading area carrying this device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area.
  • Page 89 Elevators, highways, tunnels (automobile, subway, railroad or pedestrian) where a person with impaired hearing might be isolated in an emergency. • Places where telephones are specifically installed to alert emergency authorities such as fire, police or medical assistance personnel. Fujitsu...

  • Page 90: Doc (Industry Canada) Notices

    Repairs to telecommunication equipment should be made by a Canadian authorised maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line.
  • Page 91 Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.

  • Page 92: Fcc Regulatory Information For Notebooks With Radio Device

    In cases in which the policy regarding use of radio devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. Fujitsu...
  • Page 93 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorised by Fujitsu Technology Solutions may invalidate the user’s right to operate this equipment. Fujitsu...
  • Page 94 Fn + F7 28 Cleaning 15 Fn + F8 28 Components Fn + F9 29 installing / removing 67 Fn key 26 Configuration, BIOS Setup Utility 71 Fn+F2 28 Connecting audio devices 66 Fn+F5 28 Connecting headphones 66 Crystal View display Fujitsu...
  • Page 95 17 cancel system protection 57 Manual removal of data carrier 41 protecting with password 57 Mechanical backup 55 Operating system, restoring 74 Memory card Optical drive 39 handling 42 inserting 43 removing 43 Memory expansion Packaging 16 Fujitsu...
  • Page 96 Transportation 14 SmartCard 61 Travel, notebook 14 Security Lock 55 Troubleshooting 73 Selecting a location 17 Trusted Platform Module 60 Self-discharge, battery 34 Servicing 67 Setup see BIOS Setup Utility 71 USB charging function 65 Shift 26 USB ports 64 Fujitsu...
  • Page 97 Removing 38 Using the Kensington Lock Cable 55 Windows key 26 Wireless LAN Switching the module off 45 VGA connection socket 62–63 Switching the module on 45 Virtual numeric keypad 27 Wireless LAN: Volume safety notes 12 decrease 28 Fujitsu...

Table of Contents