Figure 44 - Ip Address Successful Screen; Figure 45 - Remote Reset Screen; Figure 46 - Sds Is Now Resetting Screen - Quatech DSEW-100D User Manual
Serial device server
Hide thumbs
Also See for DSEW-100D:
- User manual (98 pages) ,
- Specifications (2 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Quatech SDS User's Manual
Step 11
Enter the WEP Keys in hex.
Step 12
Press Submit to configure the SDS with
your settings.
Note: Press the browser's Back button to make
no changes to the original settings.
Step
Procedure
Step 13
Click on the link to reset the SDS.
Step
Procedure
Step 14
Press Reset to activate your settings.
Step
Procedure
Step 15
Close and reopen the browser.
Enter the new IP address in the URL
address block.
April 2008
Figure 44 - IP Address Successful screen
Figure 45 - Remote Reset screen
Figure 46 - SDS is now resetting screen
940-0183-155
Configuring the SDS using a Web interface
These are two digit hex values that will
be used for the WEP keys. Valid
characters are 0-9, a, b, c, d, e, and f.
The IP Address Update successful screen
displays. You must reset the SDS for
your changes to take effect.
If you press the browser's Back button,
your original settings remain unchanged.
Description
The Remote Reset screen displays.
Description
The SDS is now resetting screen
displays.
Description
This confirms that the SDS is accessible.
Page 51
Advertisement
Table of Contents
