Figure 26 - Internet Protocol (Tcp/Ip) Properties Dialog Box - Quatech DSEW-100D User Manual
Serial device server
Hide thumbs
Also See for DSEW-100D:
- User manual (98 pages) ,
- Specifications (2 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Installing the device drivers
Figure 27 shows the current
configuration parameters for
the SDS. You can change these
parameters by keying in the
desired values.
Step
Procedure
Step 32
The Internet Protocol (TCP/IP) Properties
dialog box lets you change the SDS'
configuration so that it can operate in its
permanent location.
Select one of the following options:
Use the following static IP address.
Obtain an IP address automatically
from the DHCP server.
Step 33
Key in any necessary changes to the:
IP address,
Subnet mask, and
Default gateway.
Step 34
Press Send to send your changes to the
SDS.
Page 32
Figure 26 - Internet Protocol (TCP/IP) Properties dialog box
940-0183-155
Quatech SDS User's Manual
Description
If you are not sure of the configuration
parameters, consult your system
administrator.
Note: We recommend that you use a static
IP address to ensure reliable operation.
Continue with □ Step 33.
Go to □ Step 34.
Your system administrator can provide
you with specific parameters.
The Restart confirmation pop-up box
displays.
Continue with □ Step 35.
April 2008
Advertisement
Table of Contents
