Advertisement
Stick Welding
TO pREVENT SERIOUS INJURy ANd dEATH:
do not weld without grounding clamp.
When the operator is not holding the Electrode Holder, it must be
sitting on a nonconductive, nonflammable surface.
1. Turn the Power Switch to the OFF position, then
plug the Welder into a properly grounded, GFCI
The circuit must be equipped with delayed
action-type circuit breaker or fuses.
2. Set Electrode Holder down on
nonconductive, nonflammable surface
away from any grounded objects.
3. Turn the Power Switch ON.
WARNINg! TO pREVENT SERIOUS INJURy: When
Stick is selected, Welder is energized, Hot Start is
activated and Open circuit Voltage is present.
4. Select process: Press Welding Mode
Switch to scroll to
Welding
Output Knob
Mode Switch
Page 18
dc STIcK.
current
power
Switch
For technical questions, please call 1-888-866-5797.
5. Set Amperage according to Stick Settings Chart.
NOTE: Settings are approximate. Adjust as necessary.
Stick Settings chart
Electrode
Electrode
Type
diameter
E6013 dc+
E7018 dc+
Amperage
Range
1/16"
3/32"
50-90
1/8"
90-130
5/32"
130-175
3/32"
70-110
1/8"
90-130
5/32"
130-175
3/32"
75-110
1/8"
90-135
5/32"
130-175
1/8"
120-150
5/32"
160-175
Item 56825
- Quick Links:
- Setup
- Basic Welding
Hide quick links:
Advertisement
