11. TECHNICAL INFORMATION ..........15 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –...
ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- • Make sure that the electrical informa- pliance, carefully read the supplied in- tion on the rating plate agrees with structions. The manufacturer is not re- the power supply. If not, contact an sponsible if an incorrect installation and electrician.
Page 4
• Do not keep the appliance door open without supervision to prevent to fall on it. • Do not sit or stand on the open door. • Dishwasher detergents are dangerous.
ENGLISH 2. PRODUCT DESCRIPTION Top spray arm Upper basket Upper spray arm 2.1 Light beam Lower spray arm Filters • When a programme operates, a red light beam shows on the floor below Rating plate the appliance door. When the pro- Salt container gramme is completed, the red light Air vent...
Indicators Description Salt indicator. This indicator is off while the programme oper- ates. Rinse aid indicator. This indicator is off while the programme operates. Multitab indicator. 4. PROGRAMMES Programme Degree of soil Programme Options Type of load phases Prewash...
ENGLISH Consumption values Duration Energy Water Programme (min) (kWh) 90 - 160 0.9 - 1.7 8 - 15 150 - 160 1.4 - 1.6 13 - 14 1.03 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
3. Press button 4. Press button to change the • The indicators of buttons setting. go off. 5. Press the on/off button to deactivate the appliance and to confirm the set- • The indicator of button con- ting.
Page 9
ENGLISH How to adjust the level of the • The indicator of button con- water softener tinues to flash. • The acoustic signals operate, e.g. 1. Press the on/off button to activate five intermittent acoustic signals = the appliance. Make sure that the ap- level 5.
10 www.aeg.com 6.3 Filling the rinse aid dispenser Press the release button (D) to open the lid (C). Fill the rinse aid dispenser (A), no more than the mark 'max'. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam.
Page 11
ENGLISH 7.2 Setting and starting a pliance continues from the point of inter- ruption. programme Cancelling the delay start Setting mode while the countdown operates For some settings it is necessary that the When you cancel the delay start, also the appliance is in setting mode.
12 www.aeg.com 8. HINTS AND TIPS 8.1 The water softener • Do not put in the appliance items made of wood, horn, aluminium, pew- Hard water contains a high quantity of ter and copper. minerals that can cause damage to the •...
ENGLISH 9. CARE AND CLEANING WARNING! Dirty filters and clogged spray Before maintenance, deactivate arms decrease the washing re- the appliance and disconnect the sults. mains plug from the mains sock- Make a check regularly and, if necessary, clean them. 9.1 Cleaning the filters Turn the filter (A) counterclockwise and remove it.
14 www.aeg.com To prevent this, we recommend to run long duration programmes at least 2 times per month. 10. TROUBLESHOOTING The appliance does not start or it stops • - The appliance does not drain during operation. the water. Before you contact the Service, refer to •...
ENGLISH • The quantity of detergent is too much. pliance is in setting mode, refer to “Setting and starting a programme”. Stains and dry water drops on glasses 2. Press and hold, at the same time, and dishes button and button •...
Page 16
16 www.aeg.com 12. ENVIRONMENT CONCERNS Recycle the materials with the appliances. Do not dispose symbol . Put the packaging in appliances marked with the symbol applicable containers to recycle it. with the household waste. Return the Help protect the environment and...