Sony Walkman NW-S203F Notes On Usage

Nw-s200 series

Hide thumbs Also See for Walkman NW-S203F:

Download this manual See also: Service Manual, Operating Manual

Note on using

English

On transferring from the computer

When you transfer songs to this player, use the supplied SonicStage software. Songs which are transferred to

the player without using the supplied SonicStage software cannot be played back on the player.

On the format

Be sure to format the built-in ﬂash memory using the Menu mode on this player following the procedure below.

(Check all contents before formatting as all data stored will be erased.)

Press and hold the DISP/HOME button in stop mode until the HOME screen

appears.

Select

(SETTINGS) – "Advanced Menu>" – "Initialize>" – "Format>" – "OK,"

in this order.

Rotate the shuttle switch to select the item and press the  button to conﬁrm.

After selecting "OK" and conﬁrming, "FORMATTING..." appears and formatting starts. When formatting

is complete, "COMPLETE" appears.

If you format the built-in ﬂash memory using Windows Explorer, "FORMAT ERROR"

may appear on this player and any song may not play back, even if it is transferred by

SonicStage. In this case, format the built-in memory on this player.

Printed in Malaysia

NW-S200 Series

2-894-106-11(1)

Page 1 If you format the built-in ﬂash memory using Windows Explorer, “FORMAT ERROR” may appear on this player and any song may not play back, even if it is transferred by SonicStage. In this case, format the built-in memory on this player. © 2006 Sony Corporation Printed in Malaysia NW-S200 Series...
Page 2 Remarque sur l’utilisation Français Sur le transfert depuis l’ordinateur Lorsque vous transférez des pistes vers ce lecteur, utilisez le logiciel SonicStage fourni. Les pistes transférées vers le lecteur à l’aide d’un logiciel autre que SonicStage ne pourront pas être lues sur ce lecteur. Sur le format Veillez à...
Page 3 Wählen Sie (SETTINGS) – „Advanced Menu>“ – „Initialize>“ – „Format>“ – „OK“ (in dieser Reihenfolge). Wählen Sie durch Drehen des Shuttle-Schalters das Element, und drücken Sie zum Bestätigen die Taste  . Nach der Auswahl von „OK“ und dem Bestätigen wird „FORMATTING...“ angezeigt, und der Formatiervorgang beginnt.
Page 4 Nota acerca de la utilización Español Transferencia desde el ordenador Cuando transﬁera canciones al reproductor, utilice el software SonicStage suministrado. No es posible reproducir canciones que no se han transferido con el software SonicStage suministrado en el reproductor. Formato Asegúrese de que formatea la memoria ﬂash incorporada mediante el modo Menú del reproductor siguiendo el procedimiento que se explica a continuación.