Table of Contents
Advertisement
Steps
1. Align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (indicated on the heat sink), tighten the four captive screws that secure the heat sink to the system
board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Removing the heat sink (discrete graphics)
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The following image indicates the location of the heat sink (on systems with the discrete graphics option) and provides a visual
representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
29
Advertisement
Table of Contents
