How To Clean - Panasonic NC-SK1 Operating Instructions Manual
Hide thumbs
Also See for NC-SK1:
- Operating instructions manual (124 pages) ,
- Operating instructions manual (124 pages)
Table of Contents
Advertisement
Available languages
Available languages
How to Clean
■ Clean the appliance after every use.
■ Before cleaning, unplug the power plug, pour away the hot water, and cool the body.
• Do not use dish soap. (This may cause a residual odour.)
• Do not use benzine, thinner, alcohol, bleach, polishing powder, metal brush or nylon
brush, otherwise the surface will be damaged.
• Do not wash in a dishwasher.
Scale Filter
Wash carefully using a brush etc.
• If the spout is blocked by scale, hot water
will pour less easily.
• After cleaning, always attach it to the body.
How to detach
• Pull the scale filter from the body.
How to attach
• Place the lower notch
of the scale filter in the
triangle hole inside of the
spout, and insert the tabs
into the rectangles to click
them in. (Both side)
(Outside)
Wipe with a well-wrung cloth.
Scale build-up
Minerals such as calcium carbonate contained in the water build up in the kettle.
Please remove the scale.
1 Remove it regularly using:
• scale remover
Follow the instructions supplied with the scale remover.
• citric acid
Fill the kettle with water half way up and boiled it. After switch is off, put approx.
80 g of citric acid and stir it well. Let it still for approx. 30 min.
• vinegar
Fill the kettle with water up to Max level and boiled it. After switch is off, put
approx. 100 mL of vinegar and stir it well. Let it still for approx. 2 hours.
2 After removal, repeat the following steps a few times: fill with water, boil, pour away.
18
Wipe with a well-wrung cloth.
Tab (Push)
Lower notch
Body
(Inside)
Rub with a soft sponge and rinse.
Lid
Body connector
Advertisement
Table of Contents
