Table of Contents
Advertisement
Hardware interrupt on rising edge
Specifies whether a hardware interrupt is generated for a rising edge on the channel.
A hardware interrupt is only generated for the channel when there is a fault-free signal (value
status/QI = 1). This means no diagnostics is pending for the channel. See also: Address space
(Page 25)
Hardware interrupt on falling edge
Specifies whether a hardware interrupt is generated for a falling edge on the channel.
A hardware interrupt is only generated for the channel when there is a fault-free signal (value
status/QI = 1). This means no diagnostics is pending for the channel. See also: Address space
(Page 25)
4.1.3
Address space
The DI 8x24VDC M12-L 8xM12 I/O device can be configured differently; see following table.
Depending on the configuration, additional/different addresses are assigned in the process
image input.
Configuration options of the DI 8x24VDC M12-L 8xM12 I/O device
You can configure the I/O device Digital Inputs like this:
• With STEP 7 (TIA Portal)
• With GSD file in any configuration software
When you configure the I/O device by means of the GSD file, the configurations are available
under different short designations/device names in the device view of your configuration
software.
The following configurations are possible:
Table 4-2 Configuration options
Configuration
1 x 8-channel DI 8x24VDC
1 x 8-channel DI 8x24VDC QI
1 x 8-channel DI 8x24VDC MSI
I/O device digital inputs DI 8x24VDC M12-L 8xM12 (6ES7141-6BG00-0BB0)
Equipment Manual, 03/2023, A5E46570417-AD
Short designation/
Configuration software, e.g., with STEP 7 (TIA Portal)
device name in the
Integrated in hardware
GSD file (device view
in the configuration
software)
DI 8x24VDC
DI 8x24VDC QI
DI 8x24VDC MSI
4.1 Parameters/address space
catalog STEP 7
(TIA Portal)
V16 or higher with HSP
0299
V16 or higher with HSP
0299
V16 or higher with HSP
0299
PROFINET IO
GSD file in
STEP 7 (TIA Portal) V11 or
higher or STEP 7 V5.5 SP4
HF1 or higher
X
X
X
25
Advertisement
Table of Contents
