Preparation; Operation - Silvercrest SHTT 2200 B1 Operating Instructions Manual
Ionic hair dryer with touch sensor
Hide thumbs
Also See for SHTT 2200 B1:
- Operating instructions manual (116 pages) ,
- Operating instructions manual (64 pages) ,
- Operating instructions manual (88 pages)
Table of Contents
Advertisement
Available languages
Available languages
WARNING! RISK OF INJURY!
This appliance may be used by children aged 8 years or more
►
and by persons with reduced physical, sensory or mental
capabilities or lack of experience and/or knowledge if they
are supervised, or have been instructed in the safe use of the
appliance and have understood the potential risks.
Children must not use the appliance as a plaything.
►
Cleaning and user maintenance should not be performed by
►
children unless they are under supervision.
Never leave the appliance unattended while it is plugged in.
►
Never place the hairdryer close to sources of heat and protect
►
the power cable against potential damage.
Do not use the hairdryer if it has been dropped or is damaged
►
in any way. Have the appliance checked and/or repaired
by qualified technicians if necessary.
Do not cover the air intake grille while operating the appliance.
►
Clean it at regular intervals.
The hairdryer becomes hot when it is in use. Hold it only by
►
the grip when it is hot.
NOTE
No user action is required to switch the product between
►
50 and 60 Hz. The product adapts automatically to either
50 or 60 Hz.
Preparation
1) Remove all parts of the appliance and the operating instructions from the carton.
2) Remove all packaging material.
Operation
This appliance is fitted with a contact sensor. This means that the hairdryer
only switches on if you are holding it in your hand and touching the sensor
field
SHTT 2200 B1
3 at the same time.
GB │ IE
│
5
■
Advertisement
Chapters
Table of Contents
