hit counter script
Download Print this page
Pioneer AVIC-Z720DAB System Firmware Update Instructions

Pioneer AVIC-Z720DAB System Firmware Update Instructions

Hide thumbs Also See for AVIC-Z720DAB:

Advertisement

Quick Links

System Firmware Update Instructions for
AVIC-Z720DAB, AVIC-Z620BT
REMARKS:
If you have any difficulty carrying out these instructions, please contact Pioneer Customer
Support. Once upgraded to this version, it is not possible to downgrade to a lower version.
Do NOT install this firmware to a Camper Van model.
(–Camper) Model by checking the Firmware version; –C versions have Firmware version
"8.01xxxx" or higher, check the below instructions how to display the version.
This firmware is NOT intended for US version products.
Please download and print these instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order
described below.
Never turn your unit off, eject the SD memory card or disconnect the USB storage device
while the firmware is being updated.
You can only update the firmware when the vehicle is stopped and the parking brake is
engaged.
In order to perform this update, the following items are needed:
Pioneer AVIC-Z720DAB or AVIC-620BT
A USB storage device or SD card, storage device requirements:
-
2 GB or larger in capacity, formatted to FAT32
-
Should be blank (should not contain any files)
IMPORTANT (For navigation system users)
If you install this Firmware, all navigation function settings and save data will be formatted.
Once the update has finished, you will need to reconfigure the settings.
Any content purchased and added through Naviextras will also need to be re-installed. Note
that no charges will be incurred to download previously purchased content.
A. Displaying the firmware version
Check whether the firmware of your unit needs to be updated by checking the version number
of the firmware.
1. Press the HOME button to display the Top menu screen.
2. Touch the following keys in the following order.
The "System" screen appears
You can check if you have a –C

Advertisement

loading

Summary of Contents for Pioneer AVIC-Z720DAB

  • Page 1 AVIC-Z720DAB, AVIC-Z620BT REMARKS: If you have any difficulty carrying out these instructions, please contact Pioneer Customer Support. Once upgraded to this version, it is not possible to downgrade to a lower version. Do NOT install this firmware to a Camper Van model.
  • Page 2 B. Downloading the Firmware Update Files from Pioneer’s website NOTE: If you have any difficulty performing these instructions, please contact Pioneer Customer Support. Once upgraded to this version, it is not possible to downgrade to a lower version.
  • Page 3 IMPORTANT DO NOT perform any further steps of this firmware update if the model number is anything other than AVIC-Z720DAB or AVIC-620BT Disconnect any mobile devices that are currently connected to your unit. Ensure that the update file is located within the root (top) folder of your SD card or USB storage device.
  • Page 4 7. Select [Firmware Update]. The “Firmware Update” screen appears. Touch [Continue] to display the data transfer mode. Wait for the file check (approx. 2 minutes). 8. Select [Start]. The Progress status is shown. 9. Wait until the update process is complete. DO NOT pull out the SD card, USB storage device or remove power until you see the “Update Complete”...
  • Page 5 Q: What if I cannot upgrade my set / the set does not show the start up screen after more than 1 attempt? A: Please contact your local Pioneer service organisation for a product check-up. Contact Information Pioneer Customer Support Center http://www.pioneer.eu...

This manual is also suitable for:

Avic-z620bt