Installing The Battery Pack; Starting The Computer By Password - Toshiba Satellite M40 User Manual
Toshiba satellite m40: user guide
Hide thumbs
Also See for Satellite M40:
- Maintenance manual (283 pages) ,
- User manual (256 pages) ,
- Resource manual (68 pages)
Table of Contents
Advertisement
7. Pull the battery pack forward to remove it.
For environmental reasons, do not throw away a spent battery pack.
Please return spent battery pack to your TOSHIBA dealer.
Installing the battery pack
To install a battery pack, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
1. Be sure the computer's power is off and all cables are disconnected.
2. Insert the battery pack.
3. Push the battery pack until it is firmly seated.
Starting the computer by password
To start up the computer with the user password, follow these steps:
1. Turn on the power as described in Chapter 3,
following message appears:
At this point, the hotkeys Fn + F1 to F9 do not work. They will function after
you enter the password.
2. Enter the password.
3. Press Enter.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
User's Manual
Password =
Installing the battery pack
Power and Power-Up Modes
Battery pack
Getting
Started. The
6-12
- Quick Links:
- Specifications
- Hardware
- Memory
Hide quick links:
Advertisement
Table of Contents
