Table of Contents
Advertisement
Quick Start Guide
This section serves as a quick reference to the connection and installation procedures
for the PowerLook III scanner.
1. Unpack your Scanner
Unpack your scanner. Make sure that all the scanner system hardware, software,
cabling and documentation items indicated on the packing list are present.
2. Unlock your Scanner
Before using your scanner ensure that the carriage lock of scanner is in the unlocked
position. Insert a coin in the thumbscrew of the optical assembly lock and turn it firmly
counterclockwise to unlock the optical assembly to avoid damaging the optics during
transportation.
3. Connect the Interface Card (for PC users only)
a)
Turn off your computer and remove the computer's housing cover.
b)
Locate an available 16-bit slot.
c)
Insert the SCSI card by pressing it gently but firmly into the slot. Make sure it is
firmly seated in the slot.
iv
- Quick Links:
- Appendix B: Scanner Specifications
Hide quick links:
Advertisement
Table of Contents
