Checking And Cleaning The Hydraulic-Unit Shrouds - Toro Z Master Professional 6000 Series Operator's Manual

With 60in or 72in turbo force side discharge mower

Hide thumbs Also See for Z Master Professional 6000 Series:

Table of Contents

Figure 73

1. Oil filter

2. Left side bolts for the

cooling-fan housing

7. Remove the cooling-fan housing.

8. Using compressed air, blow out any debris and grass

from the engine parts, particularly around the cylinder

head cooling fins and ignition coils.

9. Install all of the shrouds onto the engine.

g016907

3. Battery

4. Right side bolts for the

cooling-fan housing

Checking and Cleaning the

Hydraulic-unit Shrouds

Service Interval: Before each use or daily

1. Disengage the PTO and set the parking brake.

2. Stop the engine, remove the key, and wait for all moving

parts to stop before leaving the operating position.

3. Move the seat forward.

4. Clean the debris and grass from the hydraulic-unit

shrouds (Figure 74).

5. Position the seat.

1. Hydraulic-unit shrouds

Figure 74

Table of Contents

74946 74947