Table of Contents
Advertisement
Connecting
4.6 Connecting industrial enclosure
5. Connect wires to terminals using wiring tool.
Note
The terminal connector is detachable
For easier access unplug the terminal connector. After connecting the wires, plug the
terminal connector back in.
– Industrial enclosure transmitter
6. Tighten cable gland.
4.6.4
Connecting HART
Note
4 to 20 mA output
It is required to use shielded cables for the pure 4 to 20 mA current output.
Note
HART communication
It is required by the FieldComm Group (FCG) to use shielded cables for the HART communication.
60
Termination of channel 1. The numbers refer to the terminal layout, see Terminal layout
(industrial enclosure) (Page 56).
Modbus
④
In + (B)
⑤
In - (A)
⑥
Out + (B)
⑦
Out - (A)
Functional Earth
Compact Operating Instructions, 12/2023, A5E38755607-AF
SITRANS FS130 & FS230
Advertisement
Table of Contents
