Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FFB53617ZW
Summary of Contents for AEG FFB53617ZW
- Page 1 EN User Manual | Dishwasher FFB53617ZW aeg.com\register...
-
Page 2: Table Of Contents
Welcome to AEG! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. PRODUCT DESCRIPTION................6 4. CONTROL PANEL..................7 5. - Page 3 • Children of less than 3 years of age should be kept away from the appliance unless continuously supervised. • Children should be supervised to ensure that they do not play with the appliance. • Keep detergents away from children. •...
-
Page 4: Safety Instructions
• If the appliance has ventilation openings in the base, they must not be covered e.g. by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. - Page 5 parts related to door assemblies, printed WARNING! circuit boards, electronic displays, pressure switches, thermostats and Dangerous voltage. sensors, software and firmware including reset software. The following spare parts 2.4 Use are available for at least 10 years after the • Do not put flammable products or items model has been discontinued: door hinge that are wet with flammable products in, and seals, other seals, spray arms, drain...
-
Page 6: Product Description
3. PRODUCT DESCRIPTION Worktop Cutlery basket Upper spray arm Lower basket Lower spray arm Upper basket Filters Rating plate The graphic is a general overview. For Salt container more details, refer to other chapters or documents provided with the appliance. Air vent Rinse aid dispenser Detergent dispenser... -
Page 7: Control Panel
4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. It is always off while the pro‐ gramme operates. Rinse aid indicator. -
Page 8: Programmes
Indicator Description ExtraHygiene indicator. 5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme Dishwasher Degree of Programme phases Options load soil Crockery, cut‐ Normal, lightly • Prewash • ExtraPower lery, pots, pans dried-on •... - Page 9 Programme Dishwasher Degree of Programme phases Options load soil None Cleaning the • Cleaning 70 °C appliance inte‐ • Intermediate rinse rior • Final rinse • AirDry • Prewash This programme offers the most efficient use of water and energy consumption for crockery and cutlery with normal soil.
-
Page 10: Options
In your request, include the product number code (PNC) from the rating plate. For any other questions regarding your dishwasher, refer to the service book provided with your appliance. 6. OPTIONS prevents rapid changes in the dishwashing temperature of the selected programme and reduces it to 45 °C. - Page 11 • Activation or deactivation of the AirDry. To enter user mode, press and hold simultaneously Delay and Option until the The saved settings remain valid until you indicators change them again. flash and the display is blank. How to set the programme selection 7.2 The water softener mode The water softener removes minerals from...
- Page 12 Regeneration process when it occurs at any point at the beginning For the correct water softener operation, the or in the middle of a programme. resin of the softener device needs to be regenerated regularly. This process is automatic and is the part of the normal All the consumption values mentioned in dishwasher operation.
-
Page 13: Before First Use
• The remaining indicators are off. When AirDry opens the door, the display • The display shows the current setting. shows the remaining time of the running programme. – = the rinse aid empty notification is deactivated. CAUTION! – = the rinse aid empty Do not try to close the appliance door notification is activated. -
Page 14: Daily Use
8.2 How to fill the rinse aid The salt is used to recharge the resin in the dispenser water softener and to assure good washing results in daily use. How to fill the salt container 1. Turn the cap of the salt container counterclockwise and remove it. - Page 15 9.2 Setting and starting a • If the rinse aid indicator is on, fill the programme rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. The Auto off function 5. Set and start a programme suitable for the type of load and the degree of soil. This function decreases energy consumption 9.1 Using the detergent by deactivating automatically the appliance...
-
Page 16: Hints And Tips
duration. After closing the door, the appliance Press simultaneously Delay and Option until continues from the point of interruption. the appliance is in programme selection mode. If the door is opened for more than 30 Cancelling the programme seconds during the drying phase, the Press and hold simultaneously Delay and running programme ends. - Page 17 10.2 Using salt, rinse aid and 6. Activate the rinse aid empty notification. detergent 10.4 Loading the baskets • Only use salt, rinse aid and detergent • Always use the whole space of the designed for dishwasher. Other products baskets. can cause damage to the appliance.
-
Page 18: Care And Cleaning
After the programme is completed, water can still remain on the inside surfaces of the appliance. 11. CARE AND CLEANING WARNING! CAUTION! Before maintenance, deactivate the If unable to remove the foreign objects, appliance and disconnect the mains plug contact an Authorised Service Centre. from the main socket. - Page 19 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage...
-
Page 20: Troubleshooting
3. To install the spray arm back, press it downwards. 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. 11.6 Cleaning the upper spray arm Do not remove the upper spray arm. - Page 21 Problem and alarm code Possible cause and solution The programme does not start. • Make sure that the appliance door is closed. • Press the start button. • If the delay start is set, cancel the setting or wait for the end of the countdown.
- Page 22 Problem and alarm code Possible cause and solution The remaining time in the display in‐ • This is not a defect. The appliance is working correctly. creases and skips nearly to the end of programme time. Small leak from the appliance door. •...
- Page 23 Problem Possible cause and solution Poor drying results. • Tableware was left for too long inside the closed appliance. Activate the function AirDry to set the automatic opening of the door and to improve the drying performance. • There is no rinse aid or the dosage of rinse aid is not sufficient. Fill the rinse aid dispenser or set the dosage of rinse aid to a higher lev‐...
-
Page 24: Technical Information
Problem Possible cause and solution Limescale deposits on the tableware, • The level of salt is low, check the refill indicator. on the tub and on the inside of the • The cap of the salt container is loose. door. •... -
Page 25: Environmental Concerns
For more detailed information about the product information sheet. Keep the energy energy label, visit www.theenergylabel.eu. label for reference together with the user manual and all other documents provided 13.2 Link to the product information with this appliance. sheet - for the UK only For more detailed information about the energy label, visit www.theenergylabel.eu. - Page 28 156813191-A-442023...