Table of Contents
Advertisement
6. FASTENING SETTING mode (Type M)
6.6.2 SEQUENTIAL FASTENING SETTING
The interlock release sequence for each spindle is set per interlock level.
Simultaneous or sequential fastening can be enabled by setting the interlock release sequence.
●SEQUENT IAL FASTENING SETTING
1) Select the TIGHTEN.SEQUENCE from the MULTI CONTROL SETTING menu. The following screen
will be displayed.
Figure 6.6-3 SEQUENTIAL FASTENING SETTING, PROGRAM NO. INPUT
2) Input the Program No. and press EXEC to display the SEQUENTIAL FASTENING SETTING
screen(SDN-DP06). When SDN-DP12 is used, settings of 16 NR are displayed.
Press QUIT to return to the MULTI CONTROL SETTING menu.
3) Move the cursor to the desired item using "∧∨＜＞" touch key, then input the number using numeric
input keys.
Press EXEC to write new settings to the NUTRUNNER.
Press QUIT to abort all new edits.
6-12
Figure 6.6-4 SEQUENTIAL FASTENING SETTING
- Quick Links:
- Chapter 12 Trouble Shooting
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
