8.9 MANUAL OPERATION
This mode allows the user to control the NUTRUNNER using the key operation of the DISPLAY PANEL.
●MANUAL OPERATION menu
1) Select the MANUAL OPERATION from the MAINTENANCE mode menu. The following screen will be
displayed.
2) Select the desired option from this screen.
Press EXIT to return to the MAINTENANCE mode menu.
MANUAL OPERATION menu
SELECTED SPINDLE mode This mode is that controls only a selected spindle.
ALL SPINDLE mode
MC COUNT RESET mode
(Type M only)
Table 8.9-1 MANUAL OPERATION mode menu and their contents.
CAUT ION
A function of MC COUNT RESET is available from the version 1.4 of the Multi-Controller.
Type S
Figure 8.9-1 MANUAL OPERATION menu
This mode is that controls all spindles.
This mode is that resets the count of the Multi-Controller.
DISPLAY PANEL MANUAL
Type M
CONTENTS
8-21