Table of Contents
Advertisement
FC5x0
Wiring
Status input Sin
Do not connect a signal source with electric voltage.
The status input is provided for use of voltage-free contacts with the following
specification:
Switching status
Closed
Open
SITRANS FC
Fig. 91: Status input connection
13.4.2 PROFIBUS PA connection terminals
For the PROFIBUS PA version there is only one configuration of the connection terminal.
Following is the configuration of the connection terminal (value E10+F41 and E10+F42
on order code position -Z, see Inputs and Outputs in chapter Setting methods for details):
PROFIBUS PA
I/O1:
I/O2:
WP:
13.4.3 Assignment of PROFIBUS PA
The table below shows possible connection terminal assignments for I/O outputs
depending on order code Position -Z.
The following figure shows the relevant position of the order code:
Tab. 35: Connection terminal assignment for PROFIBUS PA
Order code
position -Z
E10+F41
E10+F42
120 / 178
(I/O1) (I/O2)
Profibus
Pulse
Profibus
PROFIBUS PA communication
Pulse
Pulse / Frequency output
Write-protect bridge
7 M E 4 4 x
-
7
5 6
I/O1 +/-
PROFIBUS
PA
PROFIBUS
PA (IS)
A5E52748362-AA, 2023/08
Resistance
< 200 Ω
> 100 kΩ
Sin+
Sin-
WP
ON/
OFF
-
8 9 10 11
12
13 14 15 16
Connection terminal assignment
I/O2 +/-
I/O3 +/-
Pulse
–
Passive
Pulse
–
Passive (IS)
Transmitter
-
Z
I/O4 +/-
WP
–
Write-protect
–
Write-protect
Advertisement
Table of Contents
