Table of Contents
Advertisement
1. INTRODUCTION AND SAFETY
1.14 Washing the vehicle
When washing the vehicle
Use washing facilities which dispose of
waste from the washing process in an
environmentally compatible manner.
Use environmental friendly cleaning
agents as far as possible. When
washing the vehicle's under body, do
not direct the high pressure water jet on
the steering shaft joint, front axle drag
link or tie rod dust covers.
Use high-pressure washing with care.
Do not rinse:
• Universal joint cross
• Supporting bearings
• Slip joints
• Joints
• Seals
• Ventilation for gearbox, oil
reservoirs, etc.
• Connectors
• Electrical components
• Air inlets
1-28
CAUTION
While washing, ensure that the
water does not seep into the
electrical components such as
starter motor, alternator, sensors,
relays and electronic units.
Advertisement
Table of Contents
