Table of Contents
Advertisement
Available languages
Available languages
2. Clean the surfaces of the humidity sensor
wiping off the metal surface several
times.
10.5 Cleaning the drum
WARNING!
Disconnect the appliance before you
clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and drum
lifters. Dry the cleaned surfaces with a soft
cloth.
11. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
11.1 Error Codes
The appliance does not start or it stops during operation.
First try to find a solution to the problem (refer to the table). If the problem persists, contact the
Authorised Service Centre.
WARNING!
Deactivate the appliance before carrying out any check.
In case of major problems, the acoustic signals operate, the display shows an error
code and the Start/Pause button may flash continuously:
Error code
Appliance motor overloaded.
E50
Too much laundry or entrap in the drum.
Do not use abrasive materials or steel
wool to clean the drum.
10.6 Cleaning the control panel and
housing
Use a standard neutral soap detergent to
clean the control panel and housing.
Use a moist cloth to clean. Dry the cleaned
surfaces with a soft cloth.
Do not use furniture cleaning agents or
cleaning agents which can cause
corrosion.
10.7 Cleaning the airflow slots
Use a vacuum cleaner to remove fluff from
the airflow slots.
Possible cause
CAUTION!
CAUTION!
Remedy
The programme was not completed. Re‐
move the laundry from the drum, set the
programme and restart the cycle.
ENGLISH
21
Advertisement
Chapters
Table of Contents
