Table of Contents
Advertisement
Features
Voltage monitoring:
The voltages 12 V, 5 V and the CMOS battery are monitored.
With hardware monitoring - regardless of the operating system and processor - the advantages
compared to conventional software monitoring are clear:
-
suitable for all operating systems and processor types
-
no additional load on processor (performance)
-
optimum temperature protection, even if process faults or faults are present in the
operating system
-
optimum noise reduction
Three different operating modes are available and can be configured in BIOS Setup - System
Management.
Hard disk connection
An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for
the ultra ATA/66or ultra ATA/100 mode.
Ê
Connect the end of the cable marked with blue to the system board.
LAN connector
This system board has an optional Intel 82562EM LAN controller which supports transfer speeds of
10 Mbit/s and 100 Mbit/s. The LAN controller is equipped with a 3 Kbyte transmission and receiving
buffer (FIFO) and supports WOL function through Magic Packetä.
Remote boot via LAN is supported with Bootix LAN BootP and Intel PXE.
Basic Alert On LAN II is also supported. Basic Alert On LAN II helps to protect systems against theft
or damage. Basic Alert On LAN II can also inform the administrator about hardware faults and
software errors.
The LAN RJ45 connector is equipped with a yellow and a green LED (light emitting diode).
1
8 - English
All manuals and user guides at all-guides.com
2
1 = a connection exists (e.g. to a hub).
2 = Link Mode: the LAN connection is active.
WOL mode: a Magic Packet
received.
TM
is being
A26361-D1215-Z120-6-7419
Advertisement
Table of Contents
