Advertisement
Disassembly Notice
Step 1 : Disconnect the (yellow mark) connectors then remove USB FPC.
Step 2 : Remove the screw*1pc then remove USB BOARD.
1
2
The device has an Ambient Light Sensor (ALS) for power-off protection Function.
Remove
USB BOARD
Screws
QTY
Spec
1
SCREW M2*4L (5,0.8) (K) #1
Torque (kgf-cm)
2.0 ± 0.2
Assembly Notice
If FFC is damage during disassembly, please
replace new one. Here are some samples of
FFC damage:
18
Back
Advertisement
