Brother DCP-T230 Online User's Manual page 158
Hide thumbs
Also See for DCP-T230:
- Reference manual (4 pages) ,
- Quick setup manual (4 pages) ,
- Product safety manual (27 pages)
Advertisement
Related Information references are at the bottom of this page.
LED
Status
Tray not detected The paper tray is not completely
No paper fed
Paper jam
Cause
inserted.
Paper or a foreign object is preventing
the paper tray from being inserted
correctly.
The machine is out of paper or paper
is not correctly loaded in the paper
tray.
The paper is not inserted in the centre
of the manual feed slot.
The paper in the manual feed slot
does not stay straight when fed.
The Jam Clear Cover is not closed
correctly.
Paper dust has accumulated on the
surface of the paper pick-up rollers.
The paper is jammed in the machine.
More than one sheet of paper was
placed in the manual feed slot.
-OR-
Another sheet of paper was placed in
the manual feed slot before both the
Power LED and the Paper Warning
LED light up.
Action
Slowly push the paper tray
completely into the machine.
Pull the paper tray out of the
machine and remove the jammed
paper or foreign object. If you
cannot find or remove the jammed
paper, see Related Information:
Printer Jam or Paper Jam.
Do one of the following:
•
Refill the paper tray, and then
press the Mono Copy or
Colour Copy button.
•
Remove and reload the paper,
and then press the Mono Copy
or Colour Copy button.
See Related Information: Load
Paper.
Remove the paper and reinsert it in
the centre of the manual feed slot,
and then press the Mono Copy or
Colour Copy button.
See Related Information: Load
Paper in the Manual Feed Slot.
Using both hands, adjust the
manual feed slot paper guides to
make sure there is no gap between
them and the paper, and then
press the Mono Copy or Colour
Copy button.
See Related Information: Load
Paper in the Manual Feed Slot.
Make sure the Jam Clear Cover is
completely closed.
See Related Information: Paper is
Jammed Inside the Machine.
Clean the paper pick-up rollers.
See Related Information: Clean the
Paper Pick-up Rollers.
Carefully remove the jammed
paper.
See Related Information: Printer
Jam or Paper Jam.
Make sure the paper guides are set
to the correct paper size.
After completing these actions,
press
(Stop).
Do not put more than one sheet of
paper in the manual feed slot at
any one time.
Wait until both the Power LED and
the Paper Warning LED light up to
load another sheet of paper before
153
Advertisement
