Advertisement
Quick Links
www.lg.com
Copyright © 2024 LG Electronics Inc.
All Rights Reserved.
Wall Mount
Printed in Korea
Bracket
OWNER'S MANUAL
Safety and Reference
WB24GCB
Please read this manual carefully be-
fore operating your set and retain it for
future reference.
The model and serial number of the
product are located on the back and on
one side of the product. Record them
below in case you ever need service.
Model
Serial No.
*MFL721284042405REV00*
Advertisement
Related Manuals for LG WB24GCB
Summary of Contents for LG WB24GCB
- Page 1 Copyright © 2024 LG Electronics Inc. All Rights Reserved. Wall Mount Printed in Korea Bracket OWNER’S MANUAL Safety and Reference WB24GCB Please read this manual carefully be- fore operating your set and retain it for future reference. The model and serial number of the product are located on the back and on one side of the product.
- Page 2 Accessories x 10 Wall mount fixing anchors 6 pcs. Wall mount fixing screws 10 pcs. (M5 x L65) Owner’s Manual Guide Spacer Fixing Screws A 4 pcs. Guide Spacer A 4 pcs. TV protection cushion 4 pcs. (M6 x L18) Wall mounting supporter screw Levelling screws A 2 pcs.
- Page 3 Precautions for Safety - Professional installers should read this manual carefully to ensure proper installation. - Professional installers should forward this manual to customers after Install the product according to the instructions in the installa- installation and encourage them to read and store it in a convenient place tion manual.
- Page 4 - Ø 8 mm drill bit for concrete or Ø 4 mm drill bit for steel heavily titled wall or ceiling. LG is not responsible for problems caused by improper installation of the product, e.g., heavily tilted walls and ceilings. • Check the enclosed accessories before installation. We are not responsible for any lost or damaged accessories after the inner packaging is opened.
- Page 5 For installation on concrete wall For installation on wood stud Use the Ø 4 mm drill bit for wood to drill holes with the depth of 76 mm (2.9 1. Drill holes in anchor locations with a drill bit of Ø 8 mm to a depth of inches).
- Page 6 3. How to install the wall mount 2. After aligning the wall mounting bracket on the wall where the center bracket of the wood stud is marked, mark the location of the screws and then remove the wall mounting bracket. (Use a level to make sure your North America screw marks are level.) 1.
- Page 7 Australia, New Zealand, Japan 4. Tighten the wall mounting screws for the wall bracket on the drilled hole. 1. Check the wall type before mounting. - At this time, tighten the screw so that the wall, wall mounting bracket - When mounting on a wooden wall, check the screw fixing spots on the and the wall mounting screw are pressed against one another.
- Page 8 4. Tighten the wall mounting screws for the wall bracket on the drilled Japan hole. - At this time, tighten the screw so that the wall, wall mounting bracket Wood stud and the wall mounting screw are pressed against one another. (Drywall can be damaged when tightened with excessive force, please be careful.) - When tightening the screw use the + driver (manual or motorized)
- Page 9 4. Installing the Wall Mount Bracket 1. Attach the included guide spacer A and guide spacer fixing screw A to the VESA holes. • After aligning the wall mount bracket at the desired position, mark the positions for the fixings, and remove the bracket. • Fix the bracket in place, as shown in the image.
- Page 10 When using rear inputs Attach the included guide spacer B and guide spacer fixing screw B to the VESA holes. 46 mm / 1.8 Inches 19 mm • Only use guide spacer B when utilising the rear inputs. This may cause improper installation of the wall mount bracket. 2.
- Page 11 3. After pressing the TV against the wall-mounted bracket, fasten the VESA mounting positions screws attached to the TV into the wall mount. VESA 400 mm x 400 mm (15.7 Inches x 15.7 Inches) • Ensure two or more people work together when mounting the TV. • If the product is lifted by one person, it may fall and result in injury or damage.
- Page 12 6. Adjusting the level of the product VESA 300 mm x 400 mm (11.8 Inches x 15.7 Inches) (tilt) 1. Lower the lock spring. 5. Attaching the TV to the Wall Mount Bracket 2. If the product is not level after installation, you can adjust it using the screws.
- Page 13 7. Organizing the Cables and When using VESA 300 mm x 300 mm (11.8 Inches x 11.8 Inches) Attaching the Set Protection When using VESA 400 mm x 300 mm (15.7 Inches x 11.8 Inches) Cushion Attach the set protection cushion to reduce the shock received by the set as it bumps into the wall when tilting.
- Page 14 Specifications <With the wall mounting supporter removed.> [Unit: mm (inches)] 15° or more 12±2° 220(8.6) 19 (0.7) 181(7.1) 128(5.0) 200 (7.8) 90(3.5) (17.3) (0.5) (15.7) (11.8) (10.9) (0.5) 300 (11.8) 400 (15.7) 450 (17.7)
- Page 15 Model Name WB24GCB Width inches 17.7 Height inches 17.3 Depth inches Product Weight 11.6 300 x 300, 400 x 400 11.8 x 11.8, 15.7 x 15.7 Wall Mount VESA Specifications inches 400 x 300, 300 x 400 15.7 x 11.8, 11.8 x 15.7 Max.
- Page 16 <With the wall mounting supporter attached.> [Unit: mm (inches)] 700 (27.5) 31 (1.2) 356.6 (14.0) 31 (1.2) 196.6 (7.7) 214.6 (8.4) 31 (1.2) 31 (1.2) Model Name WB24GCB Width inches 27.5 Height inches 17.3 Depth inches Product Weight 17.1 300 x 300, 400 x 400 11.8 x 11.8, 15.7 x 15.7...