Advertisement
Quick Links
Advertisement
Related Manuals for Asus MB166B
Summary of Contents for Asus MB166B
- Page 1 Monitor Service Manual Model: MB166B Version no.V00 Release date: Apr.19,2024...
- Page 2 ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
- Page 3 Table of Contents 1. Safety Precautions ........................ 4 2. Exploded View ........................5 3. Disassembly and Assembly Procedures ................6 4. Trouble Shooting ........................ 16...
- Page 4 1. Safety Precautions Safety information Before setting up the monitor, carefully read all the documentation that came with the package. To prevent fire or shock hazard, never expose the monitor to rain or moisture. Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
- Page 5 2. Exploded View DESCRIPTION BEZEL PANEL BKT_IO KEY BOARD MAIN BOARD REAR_COVER SCREW -- 3...
- Page 6 3. Disassembly and Assembly Procedures 3.1 Precaution Please read the precautions as follows to prevent any damages to the LCD Monitor. Make sure all power connection is removed. Be sure that the LCD Monitor is in power off status. Prepare soft cloth and sponge as working platform to place LCD monitor horizontally.
- Page 7 3.3. Disassembly Procedure Main Subsystem 3.3.1 Bezel 1. Use disassembly tool to open all the latches along the edge of the BEZEL. (Note: Don’t damage the BEZEL.) Remove the BEZEL.
- Page 8 Main Board 1. Remove the Mylar and tapes marked in red. Disconnect all the cables to remove the rear cover ...
- Page 9 Unscrew the screws marked in red and remove the boards . .Description Q’ty Screw Torque Picture &Spec Screw 1.2±0.4kgf.cm ...
- Page 10 3.3.2 Panel 1. The Panel. 2. The boards. ...
- Page 11 4.4 Assembly Procedure 4.4.1 Panel 1. The boards. 2. The Panel.
- Page 12 Main Board 1. Assemble the boards . .Description Q’ty Screw Torque Picture &Spec Screw 1.2±0.4kgf.cm 2. Connect the pin ...
- Page 13 Connect the pin，Paste the Mylar.
- Page 14 4. Assemble the BEZEL. Note: The BEZEL is easily damaged during assembly. Please follow the steps as below to assemble the BEZEL carefully. Press the bottom corners marked in red gently. Press the TOP corners marked in blue gently. ...
- Page 15 Press four sides follow the sequence (1-2-3) as below. Take care to protect the BEZEL. Please check whether the bezel is assembled properly after assembling and make sure the BEZEL is not damaged. ...
- Page 16 4. Trouble Shooting...