Appendix C: Wake-On-Me Explained - HP dc7800 - Convertible Minitower PC Setup And Configuration Manual

Vpro setup and configuration for the dc7800p business pc with intel vpro processor technology

Hide thumbs Also See for dc7800 - Convertible Minitower PC:

Table of Contents

Appendix C: Wake-On-ME Explained

Wake-On-ME, also known as ME WoL, is a feature that allows the ME to go into a low power state when

it is not used. There are three conditions that must be met for Wake-On-ME to function.

•

The system is in a sleep state: S3, S4, or S5.

•

ME On in Host Sleep State setting is set to allow ME WoL.

•

Idle Timeout setting is set to a non-zero value.

The system must be in a sleep state (S3, S4, or S5) for Wake-On-ME to function. If the system is running

(S5), then the ME is also running.

The ME On in Host Sleep State setting must be set to ME WoL so the ME can be put to sleep and

awaken if needed when the system is in a sleep state. The ME counts down from the amount of time set in

Idle Timeout before it will go to sleep.

Idle Timeout must be set to a non-zero value. If it is set to zero, then the Wake-On-ME feature is dis-

abled and the ME will not go to sleep when not being used.

only warranties for HP products and services are set forth in the express warranty statements accompanying such products and

services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or

editorial errors or omissions contained herein.

Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the U.S. and other countries.

434476-003, 10/2007

Table of Contents

Show Quick Links

Table of Contents

Dc7800