Kenwood KDC-348U Instruction Manual
Cd-receiver
Hide thumbs
Also See for KDC-348U:
- Brochure & specs (12 pages) ,
- Instruction manual (112 pages) ,
- Service manual (50 pages)
Table of Contents
Advertisement
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from
your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for
information or service on the product.
Model KDC-BT648U/ KDC-X695/ KDC-X395/ KDC-348U Serial number
US Residents Only
Register your Kenwood product at www.Kenwoodusa.com
© 2010 Kenwood Corporation All Rights Reserved.
KDC-BT648U
KDC-X695
KDC-X395
KDC-348U
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D'EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Register Online
B64-4798-10/01 (KW/K0)
Advertisement
Table of Contents
Related Manuals for Kenwood KDC-348U
Summary of Contents for Kenwood KDC-348U
-
Page 1: Manual De Instrucciones
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. -
Page 2: Table Of Contents
CONTENTS Maintenance Getting Started Making a Call Receiving a Call How to attach/detach the faceplate During a Call How to reset your unit Call Waiting How to prepare the remote controller Downloading the Phone Book (RC-405) Easy Pairing function Canceling the display demonstration Registering Bluetooth Device (Pairing) Setting the demonstration mode Selecting the Bluetooth Device... -
Page 3: Safety
The illustrations in this manual are examples are owned by the Bluetooth SIG, Inc. used to explain more clearly how the and any use of such marks by Kenwood controls are used. Therefore, what appears Corporation is under license. Other... -
Page 4: Preparation
Preparation How to attach/detach the faceplate How to prepare the remote controller (RC-405) When you use the remote controller for the first time, pull out the insulation sheet. Insulation sheet ■ Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing. -
Page 5: Getting Started
OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance. F/W UP xx.xx YES: Starts upgrading the firmware. ; NO *: Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/... -
Page 6: Basic Operations
Indicates that the Music Search mode is selected now. Slide open the cover Bluetooth cell-phone connection status. The illustration and button names used for explanation in this manual are of (unless mentioned otherwise). Refer to the table below for the difference: KDC-BT648U/ KDC-X695 KDC-X395/ KDC-348U... - Page 7 Enters Bluetooth mode. (page 15) ■ Press to answer an incoming call. ■ Enters Bluetooth easy pairing mode if pressed and held. (page 18) KDC-X395/ KDC-348U only: ■ Selects “iPod” source. ■ Switches the controlling terminal (HANDS ON/ HANDS OFF) for iPod playback if pressed and held.
-
Page 8: Muting Upon The Reception Of A Phone Call
Muting upon the reception of a phone call (KDC-X395/ KDC-348U only) To use this feature, connect the MUTE lead to your telephone using a commercial telephone accessory. (See “Installation Manual” on a separate volume.) ■ The audio system pauses. ■... -
Page 9: Listening To The Other External Components
MONO SET ON: Improves the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes). Selects the available Program Type (page 9). Then, press 4 / ¢ to start searching. PTY SEARCH ■ [TI] is selectable only when the source is “FM”. If other playback source is selected, these settings are selectable under [TUNER SET] item. -
Page 10: Listening To A Disc/Usb Device/ Ipod
Listening to a Disc/ USB device/ iPod Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.) ■ Press to select track/file. USB terminal ■ Hold to fast-forwards/reverses. Press to pause. Press again to resume playback. ■ Press to select next folder of Audio File/iPod. - Page 11 REPEAT OFF the setting made. (page 13) Selecting Random Play This operation is effective only for the iPod or Kenwood Music Editor media. ■ To return to the root folder (audio file), top Audio CD : DISC RANDOM, RANDOM OFF...
- Page 12 (RC-405) “## STORED” (registration number) appears. • Not available if Random Play, Scan Play, You can register up to 10 songs. “MEMORY KENWOOD Music Editor media, iPod playback FULL” appears, if you try to register the is selected. eleventh song.
- Page 13 ■ Remove the rims from the center hole Adjust [SETTINGS] mode settings and disc edge before inserting a disc. While listening to an iPod or KENWOOD Music Editor media ... ■ This unit can only play the CDs with: ■...
- Page 14 USB hub and Multi Card Reader. correct title, etc. ■ ■ Make sure all important data has been You cannot operate iPod if “KENWOOD” or backed up to avoid losing the data. “” displayed on iPod. ■ Connecting a cable whose total length is longer than 5 m can result in abnormal ■...
-
Page 15: Operation Of Hands-Free Phoning
Operation of Hands-Free Phoning KDC-X395/ KDC-348U: Only with the optional accessory KCA-BT300 or KCA-BT200 connected. ■ Press and hold for about 2 seconds to memorize the KDC-X395/ KDC-348U current phone number. ■ Press and hold to enter ■ Press briefly to recall memorized phone number. -
Page 16: Making A Call
the Bluetooth device. PIN code is set to “0000” as the default. You can change this code. Refer to under <Bluetooth Setup> (page 22). ■ To move to the next row, press ■ To return to the Phone Book mode, press If you have registered 2 or more cell- phones, you need to select one of them. -
Page 17: Receiving A Call
Press on the remote controller. ■ You can input max 25 (KDC-BT648U/ KDC-X695) / 32 (KDC-X395/ KDC-348U) digits. During a Call Dial a number/ Calling a number in the call log/ Calling a number in the Phone Book Call Waiting “V-RECG READY”... -
Page 18: Bluetooth Setup
(* 50: Number of alphabetical characters. Fewer characters can be input depending End the call. on the type of characters.) Bluetooth Setup KDC-X395/ KDC-348U: Only with the optional accessory KCA-BT300 or KCA-BT200 connected. Easy Pairing function “DEVICE FULL”: When maximum of –... -
Page 19: Registering Bluetooth Device (Pairing)
By operating the Bluetooth device, register the hands-free unit (pairing). Select “KENWOOD BT CD/R-3P1”, “KCA-BT300” or ■ If an error code is displayed during paring, “KCA-BT200” from the list of connected see <Troubleshooting> (page 34). -
Page 20: Selecting The Bluetooth Device
If “PAIRING OK” is displayed, proceed to step 10. If “PIN CODE NG” is displayed, proceed to steps 8. ■ Turn the volume knob to select the number. To move to the next digit, press ¢. ■ To delete the last digit, press 4. ■... -
Page 21: Bluetooth Setup
■ ■ To select “PB NAME CHK”, play the To select “PN TYPE CHK”, play the registered voice. registered voice. (KDC-X395/ KDC-348U ■ To select “PB NAME DEL”, delete a voice only) ■ tag. Turn the volume knob to select “YES”, To select “PN TYPE DEL”, delete a voice... - Page 22 Determines whether the built-in or external microphone is to be used when the receiver incorporates a microphone. IN *: Use the built-in microphone. ; EXT: Use the external microphone. ■ [MIC GAIN], [NR LEVEL], [EC LEVEL] is selectable only for KDC-BT648U, KDC-X695 and KDC-X395/KDC-348U with KCA-BT300. www.kenwood.com/cs/ce/bt/ ■...
-
Page 23: Sms (Short Message Service)
SMS (Short Message Service) KDC-X395/ KDC-348U: Only with the optional accessory KCA-BT300 or KCA-BT200 connected. KDC-X395/ KDC-348U KDC-BT648U/ KDC-X695 Press and hold to enter Press to enter Bluetooth mode. Bluetooth mode. Display the SMS Downloading the SMS ¤ To prevent car accidents, the driver should not read the SMS while driving. -
Page 24: Hd Radio™ Tuner Control
■ The unopened message is displayed at the beginning of the list. Other messages are displayed in the order of reception. ■ The SMS that has arrived when the cell- phone is not linked with Bluetooth cannot be displayed. Download the SMS. ■... -
Page 25: Itunes Tagging
■ To cancel the Direct Access Tuning mode, The saved songs will then show up in a press playlist called “Tagged” in iTunes the every ■ If you make no button operation for 10 next time you sync your iPod to your seconds, the Direct Access Tuning mode is computer. -
Page 26: Satellite Radio Tuner Control
Satellite Radio Tuner Control Only with the optional accessory Satellite radio tuner connected. ■ Press and hold for about 2 seconds to memorize the current channel. ■ Press briefly to recall memorized channel. Channel Scan Every receivable channel is checked for 10 seconds. -
Page 27: Adjust [Settings] Mode Settings
Adjust [SETTINGS] mode settings While listening to the radio... See table below for selection. Selects the tuning mode for 4 / ¢ buttons. SEEK MODE CHANNEL *: Normal manual seeking control. ; PRESET: Search in order of the channels in the Preset memory ESN WATCH ESN=: Displays the Electronic Serial Number of satellite radio. -
Page 28: Function Settings
TRE LEVEL –8 — 0 * — +8: Adjusts the level. BASS LEVEL KDC-BT648U/ KDC-348U only: –8 — 0 * — +8: Source tone memory: Adjusts the level to memorize in each source. (Before making an MID LEVEL adjustment, select the source you want to adjust.) - Page 29 SUB-W PHASE REVERSE (180°)/ NORMAL (0°) *: Selects the phase angle of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUBWOOFER].) SUPREME SET ON *: Creates realistic sound by interpolating the high-frequency components that are lost in AAC/ MP3/ WMA audio compression.
-
Page 30: Installation/Connection
Installation/connection ■ If the power is not turned ON (“PROTECT” A Faceplate ..............(×1) is displayed), the speaker wire may have a B Escutcheon ..............(×1) short-circuit or touched the chassis of the C Mounting sleeve ...........(×1) vehicle and the protection function may D Wiring harness ............(×1) have been activated. - Page 31 This unit supports KCA-BT300 or KCA-BT200. If you experience problems during ■ Plugging a KCA-BT300/ KCA-BT200 into this installation, consult your Kenwood dealer. unit will enable BT audio. ■ Reception may drop if there are metal – Selecting Bluetooth Audio source objects near the Bluetooth antenna.
-
Page 32: Wiring Connection
(Power control/ Antenna using the optional power amplifier, or to the antenna control wire) control terminal in the vehicle. Brown To connect the Kenwood navigation system, consult MUTE your navigation manual. (Mute control wire) (Connect to the terminal that is grounded when either the telephone rings or during conversation. - Page 33 Connect the wiring harness to the unit. Other wiring connection has been completed earlier. (page 32) Before attaching, make sure the direction of the escutcheon is correct. Dashboard of (Wider hooks on the your car bottom side.) Bend the appropriate tabs to hold the mounting sleeve firmly in place.
-
Page 34: Troubleshooting
■ Install the microphone as far away as possible from the cell-phone. Fix a cable with a commercial item of tape. Peel the release coated Adjust the direction paper of double-face of the microphone to adhesive tape to fix on the driver. - Page 35 “COPY PRO” appears. A copy-protected file is played. “READ ERROR” appears. Copy the files and folders for the USB device again. If the error message is still displayed, initialize the USB device or use other USB devices. “NO DEVICE” appears. No USB device is connected.
- Page 36 “HF ERROR 07” appears. The memory cannot be accessed. Turn off the power and on again. If this message still appears, press the reset button on the control unit. “HF ERROR 68” appears. The unit cannot communicate with the cell-phone. Turn off the power and on again. If this message still appears, press the reset button on the control unit.
-
Page 37: Specifications
Operating voltage: KDC-BT648U/KDC-X695: (10.5 V — 16 V allowable): 14.4 V USB standard: USB1.1/ 2.0 (Full speed) KDC-X395/KDC-348U: (11 V — 16 V allowable): Maximum supply current: 500 mA 14.4 V File system: FAT16/ 32 Maximum current consumption: 10 A AAC decode: AAC-LC “.m4a”... - Page 38 Contains Transmitter Module 2967-3, ISHIKAWA-MACHI, FCC ID : RKXCK5000NVIA HACHIOJI-SHI TOKYO, JAPAN ■ Contains Transmitter Module IC : 5119A-CK5000NVIA KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Top Panel...
- Page 40 Dear Customer, panneau en cas de vol ou d'endommagement. Thank you for purchasing this kenwood product As mentioned in the pages of this booklet, our warranty is only Aten~io: valid in the countries listed. If your country is not listed please contact your retailer for information on warranty...
- Page 41 SOME STATES 00 NOT ALLOW LIMITATIONS ON HOW KENWOOD disclaims any responsibility for loss oflime or use 1. Take or ship il to any KENWOOD Authorized SerVice Cenler NOT COVERED or its' authorized service centres to be allribulable to faully...