Table of Contents
Advertisement
Adapter Configuration
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. Speed, Duplex
2. Spanning Tree Enabled
3. Protocol
-------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
-------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Selecting the Speed, Duplex option allows you to set the interface speed at which the card will run at half
versus full duplex. The current setting is indicated by "<===".
Adapter Configuration
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. auto, auto
2. 10,half
3. 10,full
4. 100,half
5. 100,full
-------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
-------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Selecting the Spanning Tree Enabled menu allows you to enable or disable the spanning tree flag. If this
flag is enabled (because the network the system is being attached to supports spanning trees), the
firmware will impose a waiting period of 60 seconds before the adapter is allowed to communicate with the
network. If this flag is disabled, the network adapter will be able to access the network immediately after
the system is connected.
Spanning Tree Enabled
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. Yes <===
2. No
-------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
-------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
The Protocol option allows you to set the appropriate protocol for your network as shown.
234
IntelliStation POWER 9114 Model 275 Service Guide
X = eXit System Management Services
X = eXit System Management Services
X = eXit System Management Services
Advertisement
Table of Contents
