Table of Contents
Advertisement
Step 1322-16
Remove all entries in the list of all partition(s) you recorded in "Step 1322-11" on page 72. If you are
referred to the list of partition(s) obtained in "Step 1322-11" on page 72 in future steps, the list is empty.
Go to "Step 1322-17."
Step 1322-17
Select and highlight the service action event from the "Error Associated With This Serviceable Event"
window.
Step 1322-18
Click Close Event.
Step 1322-19
Add comments for the serviceable event. Include any unique additional information. Click OK.
Step 1322-20
The following steps will add or update FRU information.
Step 1322-21
Did you replace, add, or modify a FRU of the open service action event?
No
Go to "Step 1322-23."
Yes
Go to "Step 1322-22."
Step 1322-22
From the FRU list, select a FRU that you need to update. Double-click on the FRU, and update the FRU
information. Go to "Step 1322-24."
Step 1322-23
Select the No FRU Replaced for this Serviceable Event option.
Step 1322-24
Click OK to close the service action event.
Step 1322-25
Is the list of all partition(s) you recorded in "Step 1322-11" on page 72 empty?
No
Go to "Step 1322-26."
Yes
Go to "Step 1322-33" on page 74.
Step 1322-26
Does the list of all partition(s) you recorded in "Step 1322-11" on page 72 contain more than one
entry?
No
Go to "Step 1322-33" on page 74.
Yes
Go to "Step 1322-27" on page 74.
Chapter 3. Maintenance Analysis Procedures (MAPs)
73
Advertisement
Table of Contents
