Mouse Problems - IBM JS20 - BladeCenter - 8842 Maintenance And Troubleshooting Manual
Hardware maintenance manual
Hide thumbs
Also See for JS20 - BladeCenter - 8842:
- Configuration and options manual (548 pages) ,
- Installation and user manual (132 pages) ,
- Installation and user manual (146 pages)
Table of Contents
Advertisement
Symptom
Only the cursor appears.
The monitor goes blank when
you direct it to a working blade
server, or goes blank when you
start some application programs
in the blade servers.
The screen is wavy, unreadable,
rolling, distorted, or has screen
jitter.
Wrong characters appear on the
screen.
No video.
Mouse problems
Symptom
The mouse does not work.
FRU/action
v Verify that the correct blade server controls the console. If the problem remains,
see"Undetermined problems" on page 156.
v Verify that the monitor cable is connected to the video port on the BladeCenter
management module. Some IBM monitors have their own self-tests. If you
suspect a problem with the monitor, see the information that comes with the
monitor for adjusting and testing instructions.
If you still cannot find the problem, try using the monitor with another blade
server. If the problem persists, see the Hardware Maintenance Manual and
Troubleshooting Guide for your BladeCenter unit.
1. If the monitor self-tests show the monitor is working correctly, consider
the location of the monitor. Magnetic fields around other devices (such as
transformers, appliances, fluorescent lights, and other monitors) can cause
screen jitter or wavy, unreadable, rolling, or distorted screen images. If this
happens, turn off the monitor. (Moving a color monitor while it is turned on
might cause screen discoloration.) Then move the device and the monitor at
least 305 mm (12 in.) apart. Turn on the monitor.
Notes:
a. To prevent diskette drive read/write errors, be sure the distance between
monitors and diskette drives is at least 76 mm (3 in.).
b. Non-IBM monitor cables might cause unpredictable problems.
c. An enhanced monitor cable with additional shielding is available for the
9521 and 9527 monitors. For information about the enhanced monitor
cable, contact your IBM reseller or IBM marketing representative.
2. Monitor.
3. System board.
1. If the wrong language is displayed, update the firmware or operating system
with the correct language in the blade server that has ownership of the monitor.
2. Monitor.
3. System board.
1. Make sure the correct machine is selected, if applicable.
2. Make sure all cables are locked down.
FRU/action
1. Verify that:
v The blade server is connected to the shared BladeCenter monitor.
v The mouse cable is securely connected to the BladeCenter management
module, and the keyboard and mouse cables are not reversed.
v The mouse works correctly with other blade servers.
v The mouse is recognized as a USB device, not PS2, by the blade server.
Although the mouse is a PS2-style device, communication with the mouse is
through an internal USB bus in the BladeCenter chassis. Some operating
systems permit you to select the type of mouse during installation of the
operating system. Select USB.
2. Mouse or pointing device.
3. Management module on the BladeCenter unit; see the Hardware Maintenance
Manual and Troubleshooting Guide for your BladeCenter unit.
Chapter 10. Symptom-to-FRU index
149
Advertisement
Table of Contents
