Related Manuals for Kenwood KRC-665
Summary of Contents for Kenwood KRC-665
- Page 1 KRC-765 CASSETTE RECEIVER INSTRUCTION MANUAL KRC-665 KRC-665R © B64-2236-00 (MW/IW)
-
Page 2: Table Of Contents
Contents Safety precautions.........3 Tuner features (KRC-765 / KRC-665) ...15 Switching Graphic Display Tuning Mode Switching Display Type About Cassette tape ......4 Tuning Contrast Adjustment About RDS ..........4 Direct Access Tuning Dimmer General features........5 Station Preset Memory News Bulletin with Timeout Setting Power Auto Memory Entry Local Seek... -
Page 3: Safety Precautions
Note that none of the KDC-C100, KDC-C302, any metallic objects (such as coins or metal sunlight, excessive heat or humidity. Also C205, C705, and non-Kenwood CD changers tools) inside the unit. avoid places with too much dust or the can be connected. -
Page 4: About Cassette Tape
• If you experience problems during dirty, wipe them with a dry, soft cloth. displayed, advising you quickly which station is installation, consult your Kenwood dealer. being received. • If the unit does not seem to be working Cleaning the Unit RDS (Radio Data System) stations also right, try pressing the reset button first. -
Page 5: General Features
General features Power SRC/ Release button PWR OFF Turning ON the Power Press the [SRC] button. When the power is ON, the <Security Code> (page 24) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Press the [SRC] button for at least 1 second. B NR SCAN B.S./RDM... -
Page 6: Volume
General features Sound setting Display Volume Flat "Flat"/"FLAT" Increasing Volume User memory "User"/"USER" Press the [u] button. Rock "Rock"/"ROCK" Decreasing Volume Pops "Pops"/"POPS" Press the [d] button. Easy "Easy"/"EASY" Top 40 "Top40"/"TOP40" Jazz "Jazz"/"JAZZ" Attenuator • User memory: The values set on the <Audio control> (page 6). •... -
Page 7: System Q
Press the [DISP] button. Volume offset: Each source's volume can be set as a difference Each time the button is pressed the display switches as shown from the basic volume. below. Exit Audio Control mode In Tuner source Press the [AUD] button. Information Display Frequency (KRC-765/KRC-665) -
Page 8: Station/Disc Naming (Snps/Dnps)
General features Function of the KRC-765/KRC-665 Repeat steps 3 through 5 and enter the name. Station/Disc Naming (SNPS/DNPS) Exit name set mode Attaching a title to a Station or CD. Press the [NAME] button. • When operation stops for 10 seconds the name at that time is Receive/play the station/disc you want to attach a title to registered, and Name Set mode closes. -
Page 9: Auxiliary Input Display Setting
• "PORTABLE" • "DVD" Exit Auxiliary input display setting mode Press the [DISP] button. • When operation stops for 10 seconds, the name at that time is Push the faceplate in until it clicks. selected, and Auxiliary input display setting mode closes. The faceplate is locked in place, allowing you to use the unit. -
Page 10: Tuner Features (Krc-665R)
Tuner features Function of the KRC-665R Tuning MENU Selecting the station. Select tuner source Press the [SRC] button. Select the "TUNER" display. Select the band B NR SCAN B.S./RDM MTL/M.RDM DISP NAME TI TI Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the LOUD FM1, FM2, and FM3 bands. -
Page 11: Station Preset Memory
stations preset in the FM1 band aren't put in the memory. Station Preset Memory Likewise, when it is done in the FM3 band, RDS stations preset in Putting the station in the memory. FM1 or FM2 aren't put in the memory. Select the band Press the [FM] or [AM] button. -
Page 12: Rds Features (Krc-665R)
RDS features Function of the KRC-665R Traffic Information Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Press the [TI] button. Each time the button is pressed the Traffic Information function turns ON or OFF. -
Page 13: Changing Language For Pty Function
Country Music "COUNTRY" This function can't be used during a traffic bulletin or AM reception. National Music "NATION M" Oldies Music "OLDIES" Select the Program Type Folk Music "FOLK M" Press the [FM] or [AM] button. Documentary "DOCUMENT" Each time the button is pressed the Program Type switches as shown below. -
Page 14: Pty (Program Type
RDS features Function of the KRC-665R Exit Changing Language mode Program Type preset Press the [DISP] button. Putting the Program Type in the Preset button memory and calling it up quickly. Presetting the Program Type Select the Program Type to preset Refer to <PTY(Program Type)>... -
Page 15: Tuner Features (Krc-765 / Krc-665)
Tuner features Function of the KRC-765/KRC-665 Tuning Mode MENU Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. B NR SCAN B.S./RDM... -
Page 16: Direct Access Tuning
Tuner features Function of the KRC-765/KRC-665 Direct Access Tuning (Function of remote) Auto Memory Entry Entering the frequency and tuning. Putting stations with good reception in the memory automatically. Select the band Press the [FM] or [AM] button. Select the band for Auto Memory Entry Press the [FM] or [AM] button. -
Page 17: Cassette Player Features
Cassette player features Playing Cassette Tapes Release button PROG When there's no Cassette Tape inserted Drop open the faceplate Press the Release button. Insert a Cassette Tape. Press the faceplate on the right side, and return it to its B NR SCAN B.S./RDM MTL/M.RDM DISP... -
Page 18: Fast Forwarding And Rewinding
Cassette player features Selecting the Tape type Press the [MTL] button. Each time the button is pressed the Tape type switches as shown below. Tape type Display (Type II), FeCr (Type III), Metal (Type IV) "MTL ON" Normal (Type I) "MTL OFF"... -
Page 19: External Disc Control Features
External disc control features Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player B NR SCAN B.S./RDM MTL/M.RDM DISP... -
Page 20: Track Search
External disc control features Press the [38] button. Track Search Selecting the song you want to hear. Input "0" to select disc 10. Press the [4] or [¢] button. Track/Album Repeat Replaying the track/disc you're listening to. Album Search (Function of disc changer) Press the [REP] button. -
Page 21: Random Play
When it's ON, "RDM ON" is displayed. Press the [4] or [¢] button. ¢ Select the characters When the [ ] button is pressed, the next song select starts. Press the [FM] or [AM] button. Characters can be entered by using a remote with a number button. Example: If "DANCE"... -
Page 22: Dnpp (Disc Name Preset Play)
External disc control features Menu system Text/Title Scroll MENU Scrolling the displayed CD text or MD title. Press the [DISP] button for at least 1 second. DNPP (Disc Name Preset Play) (Function of disc changers with remote) B NR SCAN B.S./RDM MTL/M.RDM DISP NAME... -
Page 23: Manual Clock Adjustment
Menu System Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. Enter Menu mode Press the [MENU] button for at least 1 second. "MENU"... -
Page 24: Security Code
Menu system battery power source Security Code Turn the power ON. Because authorization by the Security Code is required when it's Do the step 4 through 7 step operation, and reenter the removed from the vehicle, personalizing this unit is by using the security code. -
Page 25: Switching Graphic Display
Function of the KRC-765/KRC-665R Enter Clock Adjust mode Press the [4] or [¢] button for at least 1 second. Selectable Illumination The clock display blinks. Selecting the button illumination color as green or red. Adjust the hours Display Setting Press the [FM] or [AM] button. "KEY GRN"... -
Page 26: Contrast Adjustment
Menu system Function of the KRC-765 When "NEWS 00M" — "NEWS 90M" is set, the News Bulletin Interrupt function is ON. Contrast Adjustment When it's ON, the "NEWS" indicator is ON. Adjusting the display contrast. When the news bulletin starts, "NEWS" is displayed, and it Display and Setting switches to the news bulletin. -
Page 27: Crsc (Clean Reception System Circuit)
Function of the KRC-665R Function of the KRC-665R Auto Memory Entry <In Tuner mode> Restricting RDS Region (Region Restrict Function) For the operation method refer to <Auto Memory Entry> (page 11). You can choose whether or not to restrict the RDS channels, received with the AF function for a particular network, to a specific region. -
Page 28: Monaural Reception
Menu system Basic Operations of remote Function of the KRC-665R Monaural Reception <In FM reception> Noise can be reduced when stereo broadcasts are received as monaural. 4/¢ Display Setting "MONO OFF" The monaural reception is OFF. "MONO ON" The monaural reception is ON. –... -
Page 29: Loading And Replacing The Battery
Loading and Replacing the battery In Tuner source Use one lithium battery (CR2025). [FM]/ [AM] buttons Insert the batteries with the + and – poles aligned properly, Select the band. following the illustration inside the case. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. -
Page 30: Basic Operations
Basic Operations of remote In Cassette tape source [4]/ [¢] buttons Do <Tape Advance)> (page 18). [38] button Plays the reverse side of the tape. [FM ] button Fast forwards the tape. When the [38] button is pressed it releases. [AM] button Rewinds the tape. -
Page 31: Accessories (Krc-765 / Krc-665)
Accessories (KRC-765 / KRC-665) External view External view 2WARNING ..Number of items ..Number of items If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. -
Page 32: Connecting Wires To Terminals (Krc-765 / Krc-665)
Front left output (White) Rear right output (Red) Front right output (Red) Fuse (10A) FM/AM antenna input To KENWOOD disc changer/ DAB control input/ KPA-SD100/KPA-HD100/KPA-SS100 If no connections are made, do not let the wire come out from the tab. Wiring harness... -
Page 33: Accessories (Krc-665R)
Accessories (KRC-665R) External view External view 2WARNING ..Number of items ..Number of items If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. -
Page 34: Connecting Wires To Terminals (Krc-665R)
Connecting Wires to Terminals (KRC-665R) Rear left output (White) Front left output Antenna Cord (ISO) (White) Fuse (10A) Antenna Conversion Adaptor (ISO–JASO) (Accessory6) To KENWOOD disc changer/ DAB control input/ FM/AM antenna KPA-SD100/KPA-HD100/KPA-SS100 input To connect these leads, refer to the relevant instruction manuals. - Page 35 Connecting Wires to Terminals (KRC-665R) When the connection is made as in 3 above, the unit's 2WARNING Connecting the ISO Connector (see p.23) power will not be linked to the ignition key. For that reason, The pin arrangement for the ISO connectors depends on the always make sure to turn off the unit's power when the type of vehicle you drive.
-
Page 36: Installation
Installation ■ Installation ■ Installing in Japanese-Made Cars Refer to the section "Removing the hard rubber frame" (page 36) Firewall or metal support and then remove the hard rubber frame. Align the holes in the unit (two locations on each side) with the Screw (M4X8) (commercially vehicle mounting bracket and secure the unit with the accessory... - Page 37 Installation ■ Removing the hard rubber frame ■ Removing the Unit Refer to the section “Removing the hard rubber frame” and then Engage the catch pins on the removal tool and remove the two remove the hard rubber frame. locks on the lower level. Remove the screw (M4 ×...
-
Page 38: Troubleshooting Guide
Troubleshooting Guide What might seem to be a malfunction in your unit may The TEL mute function does not work.15 ✔ The TEL mute wire is not connected properly. just be the result of slight misoperation or miswiring. ☞ Connect the wire correctly, referring to the section on Before calling service, first check the following table <Connecting Wires to Terminals>. - Page 39 Troubleshooting Guide Cassette tape source The Touch Sensor Tone doesn’t sound.34 ✔ The preout jack is being used. Can’t remove tape.44 ☞ The Touch Sensor Tone can’t be output from the preout jack. ✔ The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF.
- Page 40 Troubleshooting Guide Disc source Track Search can't be done.66-2 ✔ For the albums first or last song. "AUX" is displayed without achieving External disc control mode.50 ☞ For each album, Track Search can't be done in the backward ✔ O-N switch is set to "O" side. direction for the first song or in the forward direction for the last ☞...
- Page 41 Troubleshooting Guide The messages shown below display your systems HOLD ER: The protective circuit in the unit activates when the condition. temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. EJECT: No disc magazine has been loaded in the changer. ➪...
-
Page 42: Specifications
Specifications Specifications subject to change without notice. FM tuner section (KRC-765 / KRC-665) Cassette player section Frequency range Tape Speed...............4.76 cm/sec. (50 kHz space) .........87.5 MHz –108.0 MHz Wow & Flutter (WRMS) ............0.08 % (200 kHz space) .......87.9 MHz –107.9 MHz Frequency response (±3 dB) (70 µs)......30 Hz –...