Table of Contents
Advertisement
Troubleshooting
Sound system
Problem
No sound is heard
TV output signal
Refer also to your Personal Conferencing Kit's documentation.
Problem
Display on TV is poor
No display
9-18
Procedure
Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure.
Check Windows Device Manager. Make sure the
sound function is enabled and that settings for
I/O address, Interrupt level and DMA are correct
for your software and do not conflict with other
hardware devices that you may have connected
to the computer.
If problems persist, contact your dealer.
Procedure
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5,
If you turn the computer off in
NOTE:
Resume
mode while the display is on TV, the
computer will select either the internal LCD or an
external computer CRT as the display device.
If problems persist, contact your dealer.
The
Keyboard.
User's Manual
Advertisement
Table of Contents
