3.9 Printer Test
Subtest 02
Function
This subtest is for IBM compatible printers, and tests the following functions:
This subtest prints the various print types shown below:
Subtest 03
Wraparound
NOTE: To execute this subtest, a printer wraparound connector must be connected to the
computer's printer port. The connector wiring diagram is described in Appendix
F.
This subtest checks the output and bi-directional modes of the data control and
status lines through the parallel port wraparound connector (34M741986G01).
(Both output and bi-directional modes are tested.)
PORTEGE M100 Maintenance Manual (960-452)
Normal print
Double-width print
Compressed print
Emphasized print
Double-strike print
All characters print
3 Tests and Diagnostics
3-23