Figure 1-31 Inserting Dimm Into The Extender Board Connector - HP rp4410 Installation Manual

Installation guide, sixth edition - hp 9000 rp4410/rp4440

Hide thumbs Also See for rp4410:

Table of Contents

Installing the System

Installing Additional Components

Installing DIMMs

To install DIMMs, follow these steps:

Step 1. Align the DIMM with the socket located on the memory extender board. (Align the notch in the

DIMM with the tab in the connector.)

Step 2. Firmly and evenly push on each end of the DIMM until it seats in the socket. Ensure that the

extraction levers are in the closed position.

Figure 1-31 Inserting DIMM Into the Extender Board Connector

Replacing the Memory Extender Board

To replace the memory extender board, follow these steps:

Step 1. Ensure that the extraction levers are in the outward, unlocked position.

Step 2. Align the memory extender board with the left and right chassis guide slots.

Step 3. Slide the memory extender board in until it begins to seat in the socket located on the midplane

riser board.

Step 4. Push the extraction levers inward to the locked position to fully plug the memory extender board

into the midplane riser board.

Step 5. Replace the front cover onto the chassis. (See "Replacing the Front Cover" on page 30.)

Chapter 1

Table of Contents

Rp4440 9000 rp4410-4 9000 rp4440-8 9000 rp4410 9000 rp4440