Initial Settings
Setting the Operating Conditions
of the RCP-D50/D51
By using the RCP Config menu or LCD setting
display, you can set the built-in clock of the RCP-D50/
D51 and adjust various conditions of the RCP-D50/
D51, such as the sound volume of the warning buzzer
and the brightness of the indicators and LCD.
Displaying the RCP Config menu/LCD
setting display
Proceed as follows:
PAINT 1 PAINT 2 PAINT 3
SCENE OTHERS FUNCTION MONITOR
MENU
Others Menu
Adjusting
RCP
LCD
Config
MONITOR
BRIGHT
1
Press to light the OTHERS button of the menu
operation block.
The OTHERS menu appears.
2
To display RCP Config menu, press
[RCP Config]
.
The RCP Config menu appears.
1
Camera
File
Config
2
LCD
Memory
Moni.
Stick
CONTRAST
RCP Config. Menu
RCP
RE
Adjusting
Setting
Cable
SW
Camera
Comp
Setting
To obtain the LCD setting display, press
The LCD setting display
Setting the Built-in Clock
The RCP-D50/D51 has a built-in clock to record the
date and time when scene files are saved to Memory
Sticks.
To set the clock, proceed as follows:
1
Press the OTHERS button in the Menu operation
block so that the OTHERS menu is displayed on
[RCP Config]
the LCD, then press
Config menu.
2
Set the menu to Advanced Setting mode.
[Security]
1) Press
on the RCP Config menu.
2) Press and highlight
[Status]
[Menu Set]
The
,
buttons are displayed.
[Status]
3) Press
.
The Security Status menu appears.
[Advance Mode]
4) Press
3
[Date/Time]
Press
on the RCP Config menu.
The current setting is displayed on the Date/Time
Set menu.
Date Time Set Menu
2001/11/17
(Sat)
22 : 12 : 31
Date
Time
Exit
Date
No.
Time
Secu-
rity
[LCD]
appears.
(page 48)
to call the RCP
[Engineer Mode]
.
[Code No.]
, and
.
Exit
.
45