Shutting Down Eternusmgr; Registering The Eternusmgr Service For Automatic Startup - Fujitsu ETERNUS User Manual

Hide thumbs Also See for ETERNUS:

Table of Contents

Chapter 3 Startup and Shutdown

3.2 ETERNUSmgr for Windows®

•

For Windows Server® 2003 or Windows Server® 2003 R2

3.2.2

Shutting Down ETERNUSmgr

Perform the following to manually shutdown ETERNUSmgr for Windows®:

Procedure

3.2.3

After installation is completed, ETERNUSmgr for Windows® is already registered as an

automatic startup service that will become active the next time the server is rebooted, so there is

no need to manually set ETERNUSmgr for automatic startup.

If, for any reason, the ETERNUSmgr automatic startup setting is disabled, do the following to

restore it. This setting will be enabled at the next server reboot.

Procedure

P2X0-0202-04ENZ0

ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-

Select the [STXPOLL] service from [Services] on the [Administrative Tools] of

the [Control Panel], and click the [Stop] button.

Select the [STXPOLL] service from [Services] on the [Administrative Tools] of

the [Control Panel], then set the startup method to: [Automatic].

To disable automatic startup of ETERNUSmgr, set the startup method to [Manual] in the

above procedure.

End of procedure

Table of Contents

Eternusmgr