Page 1
MF1466-01 CMOS 8 - BIT SINGLE CHIP MICROCOMPUTER S5U1C8F360Z1 Manual (Adapter Board for S1C8F360/8F361)
Page 2
No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any...
Page 3
New configuration of product number Starting April 1, 2001, the configuration of product number descriptions will be changed as listed below. To order from April 1, 2001 please use these product numbers. For further information, please contact Epson sales representative. Devices 88104...
• When switching the operating clock from OSC3 to OSC1, be sure to switch OSC3 oscillation off with separate instructions. Using a single instruction to process simultaneously may cause a malfunction of the CPU. EPSON (ADAPTER BOARD FOR S1C8F360/8F361) S5U1C8F360Z1 MANUAL...
Page 9
Mount parts such as a switch and a capacitor at the RESET pin on the Adapter Board. S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) high speed mode) when the OSC3 oscilla- pins on the board must be changed to the CF and CG pins, ___________ EPSON CHAPTER 2: PRECAUTIONS to V and CA to CE (CA...
CG at C1. Table 3.1 Pin function for S1C8F361 Print S1C8F360 S1C8F361 and AV jumpers and mount the booster capacitor for the CF Fig. 3.1 CF and CG for the S1C8F361 EPSON S1C8F361 S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361)
Wiring Diagram" in the "S1C8F360 Technical Manual" for the basic parts to be mounted. (7) IC socket pattern Cannot be used. S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) CHAPTER 4: NAME AND FUNCTION OF EACH PART UNCTION OF 2 flat type). EPSON...
Serial I/F data output pin GND pin Serial I/F data input pin GND pin RESET Initial reset output pin GND pin SPRG Programming mode setup output pin GND pin N.C. N.C. EPSON short short open open short S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361)
S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) CHAPTER 6: CONNECTING WITH THE TARGET SYSTEM 2 flat type and 60-pin/30-pin I/O cables mark Fig. 6.1 Connecting with the target system EPSON ARGET YSTEM 2 flat type) for connect- CN1-1 (40 pins) CN1-2...
I/O connectors for the target system (40-pin): 3M 3432-6002LCSC (30-pin): 3M 3440-6002LCSC PECIFICATIONS 48 mm (H) 1/1 set 2/1 set 2/1 set (both cables are the same length) 2, 1 set) 1/1 set 2/1 set 2/1 set EPSON (ADAPTER BOARD FOR S1C8F360/8F361) S5U1C8F360Z1 MANUAL...
Page 17
EPSON HONG KONG LTD. 20/F., Harbour Centre, 25 Harbour Road Wanchai, Hong Kong Phone: +852-2585-4600 Fax: +852-2827-4346 Telex: 65542 EPSCO HX EPSON TAIWAN TECHNOLOGY & TRADING LTD. 10F, No. 287, Nanking East Road, Sec. 3 Taipei Phone: 02-2717-7360 Fax: 02-2712-9164 Telex: 24444 EPSONTB HSINCHU OFFICE 13F-3, No.
Page 18
In pursuit of “Saving” Technology, Epson electronic devices. Our lineup of semiconductors, liquid crystal displays and quartz devices assists in creating the products of our customers’ dreams. Epson IS energy savings.