Ipv6 Mld Snooping Vlan Mrouter - Dell Networking 7048 Reference Manual
Powerconnect 7000 series systems
Hide thumbs
Also See for Networking 7048:
- Release note (74 pages) ,
- Configuration manual (1270 pages) ,
- Reference manual (17 pages)
Advertisement
ipv6 mld snooping vlan mrouter
This command statically configures a port as connected to a multicast router
for a specified VLAN. The no form of this command removes the static
binding.
Syntax
ipv6 mld snooping vlan
no ipv6 mld snooping vlan
vlan-id — Specifies a valid VLAN ID.
•
interface-id — The next-hop interface to the Multicast router.
•
Default Configuration
There are no multicast router ports configured by default.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines
Example
console(config)#ipv6 mld snooping vlan 10 mrouter interface Gi1/0/2
ipv6 mld snooping (Global)
Use the ipv6 mld snooping (Global) command to globally enable MLD
Snooping on the system (Global Config Mode). Use the no form of the
command to disable MLD snooping. Use the vlan parameter to enable MLD
Snooping on a specific VLAN.
Syntax
ipv6 mld snooping [vlan
no ipv6 mld snooping [vlan
vlan-id — Specifies a VLAN ID value.
•
548
IPv6 MLD Snooping Commands
vlan-id
mrouter interface
vlan-id
mrouter interface
vlan-id
]
vlan-id
]
interface
interface
- Quick Links:
- Dhcp Snooping
Hide quick links:
Advertisement
Chapters
