ge.com
Gas/Control
Lockout
(on some models)
Your contro! wi!! a!low you to lock out the
surface burners, oven burners and control
panel so they cannot be activated
To lock/unlock the controls:
[_
Turn all surface burners off.
[_
Touch and hold the GAS/CONTROL
LOCKOUTpadfor 3 seconds until the
display shows LOC
[_
To unlock the control, touch and hold
the GAS/CONTROL LOCKOUTpad for
3 seconds until LOC disappears from
the display.
When this feature is on and the touch pads
are touched, the control will beep and the
display will show LOC.
Thecontro! lock-out mode affects a!!
controls. No controls wil! work when this
feature is activated.
Theadjustment wi!! be retained in memory
after a power failure.
12 Hour,
24 Hour
or Clock
Black-Out
Your contro! is set to use a !2 hour clock.
If gou would prefer to have a 2/4hour militaru
time clock or black-out the clock displau,
follow the steps below.
_]
Touch the BAKE and BROILHI/LO
pads at the same time for 5 seconds
until the display shows SF.
[_
Touch the CLOCKpad once.
The displag will show 12 hr
If this isthe choice you want,
touch the STARTpad.
Touch the CLOCKpad again to change
to the 2/4hour militarg time clock. The displag
will show 24 hr. If this is the choice you want,
touch the STARTpad.
Touch the CLOCKpad again to black-out
the clock displau. The displag will show OFF.
If this isthe choice you want, touch the
STARTpad.
NOTE:If the clock is in the black-out mode _jou
wi!! not be able to use the De!ag Start function.
:@
/
Cook
and
Hold
Your new contro! has a cook and hold feature
that keeps cooked foods warm for up to 5
hours after the cooking function is finished.
This feature can only be used when
timed cooking.
To activate this feature, follow the steps
below.
IZ] Touch the BAKE and BROILHI/LO
pads at the same time for 5 seconds
until the display shows SF.
[_
Touch the COOKINGTIME pad. The
display will show Hid OFF.
Touch the COOKINGTIME pad again
to activate the feature. The display
will show Hid ON.
[_
Touch the STARTpad to activate the
cook and hold feature and leave the
control set in this special features mode.
25