Removing A Memory Module - Toshiba Satellite L640 Series User Manual
Hide thumbs
Also See for Satellite L640 Series:
- Maintenance manual (281 pages) ,
- User manual (229 pages) ,
- Manual del usuario (227 pages)
Table of Contents
Advertisement
2
1. Memory module cover
9. Install the battery pack - refer to
Chapter 6, Power and Power-Up Modes, if required.
10. Turn your computer over.
11. Turn the computer on and make sure the added memory is recognized -
to confirmed it, Start -> Control Panel -> System and Security ->
System icon.
Removing a memory module
To remove the memory module, follow the steps as detailed below:
1. Shut down the computer - make sure the Power indicator is off (refer to
the
required).
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Close the display panel.
4. Turn the computer upside down and remove the battery pack (refer to
Replacing the battery pack
Modes, if required).
5. Loosen three screws securing the memory module cover in place -
please note that those screws are attached to the cover in order to
prevent them from being lost.
6. Slide your fingernail or a thin object under the cover and lift it off.
7. Push the latches away from the module in order to release it - a spring
will force one end of the module up at an angle.
User's Manual
Figure 3-6 Seating the memory module cover
Turning off the power
Hardware, Utilities and Options
2. Screws
Replacing the battery pack
section in Chapter 1, Getting Started if
section in Chapter 6, Power and Power-Up
1
section in
3-23
- Quick Links:
- Hardware
Hide quick links:
Advertisement
Table of Contents
