Dell Force10 Z9000 Configuration Manual page 584
Ftos configuration guide for z9000 system
Hide thumbs
Also See for Force10 Z9000:
- Reference manual (1483 pages) ,
- Configuration manual (848 pages) ,
- Manual (56 pages)
Table of Contents
Advertisement
Figure 26-19. R1 Configuration for MSDP with Anycast RP
ip multicast-routing
!
interface GigabitEthernet 1/1
ip pim sparse-mode
ip address 10.11.3.1/24
no shutdown
!
interface GigabitEthernet 1/2
ip address 10.11.2.1/24
no shutdown
!
interface GigabitEthernet 1/21
ip pim sparse-mode
ip address 10.11.1.12/24
no shutdown
!
interface Loopback 0
ip pim sparse-mode
ip address 192.168.0.1/32
no shutdown
!
interface Loopback 1
ip address 192.168.0.11/32
no shutdown
!
router ospf 1
network 10.11.2.0/24 area 0
network 10.11.1.0/24 area 0
network 10.11.3.0/24 area 0
network 192.168.0.11/32 area 0
!
ip multicast-msdp
ip msdp peer 192.168.0.3 connect-source Loopback 1
ip msdp peer 192.168.0.22 connect-source Loopback 1
ip msdp mesh-group AS100 192.168.0.22
ip msdp originator-id Loopback 1
!
ip pim rp-address 192.168.0.1 group-address 224.0.0.0/4
|
Multicast Source Discovery Protocol (MSDP)
584
Advertisement
Chapters
Table of Contents
Troubleshooting
