Dell Force10 Z9000 Configuration Manual page 792
Ftos configuration guide for z9000 system
Hide thumbs
Also See for Force10 Z9000:
- Reference manual (1483 pages) ,
- Configuration manual (848 pages) ,
- Manual (56 pages)
Table of Contents
Advertisement
Figure 39-3. User john's Login and the List of Available Commands
apollo% telnet 172.31.1.53
Trying 172.31.1.53...
Connected to 172.31.1.53.
Escape character is '^]'.
Login: john
Password:
FTOS#show priv
Current privilege level is 8
FTOS#?
configure
disable
enable
exit
no
show
terminal
traceroute
FTOS#confi
FTOS(conf)#?
end
exit
no
snmp-server
FTOS(conf)#
Specify LINE mode password and privilege
You can specify a password authentication of all users on different terminal lines. The user's privilege
level will be the same as the privilege level assigned to the terminal line, unless a more specific privilege
level is assigned to the user.
To specify a password for the terminal line, use the following commands, in any order, in the LINE mode:
Command Syntax
privilege level level
password [encryption-type] password
To view the password configured for a terminal, use the
|
Security
792
Configuring from terminal
Turn off privileged commands
Turn on privileged commands
Exit from the EXEC
Negate a command
Show running system information
Set terminal line parameters
Trace route to destination
Exit from Configuration mode
Exit from Configuration mode
Reset a command
Modify SNMP parameters
Command Mode
LINE
LINE
Purpose
Configure a custom privilege level for the terminal
lines.
level level range: 0 to 15. Levels 0, 1 and 15 are
•
pre-configured. Levels 2 to 14 are available for
custom configuration.
Specify either a plain text or encrypted password.
Configure the following optional and required
parameters:
•
encryption-type: Enter 0 for plain text or 7 for
encrypted text.
password: Enter a text string up to 25 characters
•
long.
show config
command in the LINE mode.
Advertisement
Chapters
Table of Contents
Troubleshooting
