Profiles > Qos - Dell PowerConnect W-Airwave Configuration Manual
W-airwave 7.5 configuration guide
Hide thumbs
Also See for PowerConnect W-Airwave:
- User manual (334 pages) ,
- Configuration manual (176 pages) ,
- Manual (50 pages)
Table of Contents
Advertisement
would like to apply to that VLAN. If you do not specify a per-VLAN AAA profile, traffic from clients connected to
an untrusted wired port or VLAN will use the global AAA profile, if configured.
Perform these steps to configure a Mobility Switch > VLAN profile:
1. Select Profiles > Mobility Switch > VLAN in the Navigation pane. The details page summarizes the current
profiles of this type.
2. Select the Add button to create a new VLAN profile, or select the pencil icon next to an existing profile to
edit. Complete the settings as described in
Table 48
Field
General Settings
Folder
Name
Referenced Profiles
VLAN AAA profile
VLAN IGMP Snooping profile None
Other Settings
Description
Mac Aging Time in Minutes
(1-44640)
Static MAC Items
MAC
Ethernet channel of
interfaces (0-7)
3. Select Add or Save. The added or edited profile appears on the Mobility Switch page, and on the details page.
Profiles > QoS
The following QoS profiles configure traffic management and VoIP functions.
Traffic Management—Specifies the minimum percentage of available bandwidth to be allocated to a specific
SSID when there is congestion on the wireless network, and sets the interval between bandwidth usage
reports. Refer to
VoIP Call Admission Control—Dell PowerConnect W's Voice Call Admission Control limits the number of
active voice calls per AP by load-balancing or ignoring excess call requests. This profile enables active load
balancing and call admission controls, and sets limits for the numbers of simultaneous Session Initiated
Protocol (SIP), SpectraLink Voice Priority (SVP), Cisco Skinny Client Control Protocol (SCCP), Vocera or
Dell PowerConnect W-AirWave 7.5 | Configuration Guide
Profiles > Mobility Switch > VLAN Profile Settings
Default
Top
Blank
None
5
"Profiles > QoS > Traffic Management" on page
Table
48:
Description
Set the folder with which the profile is associated. The drop-down menu
displays all folders available for association with the profile.
Enter the name of the profile.
Assign an AAA profile to a VLAN to enable role-based access for wired
clients connected to an untrusted VLAN or port on the Mobility Access
Switch. This parameter applies to wired clients only.
Note that this profile will only take effect if the VLAN and/or the port on the
switch is untrusted. If both the port and the VLAN are trusted, no AAA profile
is assigned.
Select the VLAN IGMP Snooping profile to reference. Refer to
Mobility Switch > IGMP Snooping" on page
Specify a description/name for the VLAN.
Specify the MAC aging time in minutes.
Adds the specified MAC address to the MAC address table.
The port channel of the MAC item.
98.
102.
Configuration Reference | 101
"Profiles >
Advertisement
Table of Contents
