Security - Dell PowerConnect W-Airwave Configuration Manual
W-airwave 7.5 configuration guide
Hide thumbs
Also See for PowerConnect W-Airwave:
- User manual (334 pages) ,
- Configuration manual (176 pages) ,
- Manual (50 pages)
Table of Contents
Advertisement
2. Select the Add button to create a new 802.11K profile, or click the pencil icon next to an existing profile to
edit. Complete the settings as described in
Table 65
Field
General Settings
Folder
Name
Other Settings
Measurement Mode for
Beacon Reports
Advertise 802.11K Capability
Forcefully Disassociate On-
hook Voice Clients
3. Select Add or Save. The added or edited profile appears on the 802.11K page, and on the details page.
Security
Dell PowerConnect W Configuration supports user roles, policies, server groups, and additional security
parameters with profiles that are listed in the Security portion of the navigation pane on the Dell PowerConnect
W Configuration page, as illustrated in
Dell PowerConnect W-AirWave 7.5 | Configuration Guide
Profiles > SSID > 802.11K Profile Settings
Default
Top
Blank
beacon-table
No
No
Table
65:
Description
Set the folder with which the profile is associated. The drop-down menu
displays all folders available for association with the profile.
Enter the name of the profile.
Select the Measurement Mode for Beacon Reports drop-down menu and
specify one of the following measurement modes:
active—Enables active beacon measurement mode. In this mode, the
client sends a probe request to the broadcast destination address on all
supported channels, sets a measurement duration timer, and, at the end
of the measurement duration, compiles all received beacons or probe
response with the requested SSID and BSSID into a measurement report.
beacon-table—Enables beacon-table beacon measurement mode.In this
mode, the client measures beacons and returns a report with stored
beacon information for any supported channel with the requested SSID
and BSSID. The client does not perform any additional measurements.
passive—Enables passive beacon measurement mode. In this mode, the
client sets a measurement duration timer, and, at the end of the
measurement duration, compiles all received beacons or probe response
with the requested SSID and BSSID into a measurement report.
NOTE: If a station does not support the selected measurement mode, it
returns a Beacon Measurement Report with the Incapable bit set in the
Measurement Report Mode field.
Select this option to allow Virtual APs using this profile to advertise 802.11K
capability. This feature is disabled by default.
Select this option to allow the AP to forcefully disassociate on-hook voice
clients (clients that are not on a call) after period of inactivity. Without the
forced disassociation feature, if an AP has reached its call admission control
limits and an on-hook voice client wants to start a new call, that client may be
denied. If forced disassociation is enabled, those clients can associate to a
neighboring AP that can fulfil their QoS requirements. This feature is disabled
by default.
Figure
27:
Configuration Reference | 131
Advertisement
Table of Contents
